Juniper SFP-25G-BX10U-I · 740-106775

MPN / P/N

740-106775

Модель производителя

SFP-25G-BX10U-I

Заводской номер

740-106775

Поддержка breakout — с ограничениями платформы

No

MSA compliance (SFF, for e.g. SFF-8665)

SFF-8472 Rev 12.2 and SFF-8402

Формфактор

SFP28

Тип изделия

Optical Transceiver

Разъём

Simplex LC PC/UPC

25GBASE-BR10 / Тип кабеля / волокна

SMF

25GBASE-BR10 / Размер сердцевины / оболочки

9/125 µm

25GBASE-BR10 / Digital Diagnostic Monitoring

Temperature Supply voltage TX bias current TX power RX power

25GBASE-BR10 / Дальность / длина — с условиями профиля

2 m to 10 km

25GBASE-BR10 / Effective modal bandwidth

(for MM only)

25GBASE-BR10 / Класс волокна

(for MM only)

25GBASE-BR10 / Form Factor (i.e., SFP, SFP+, XFP, CFP, etc..)

SFP28

25GBASE-BR10 / Максимальное энергопотребление

1.5W

25GBASE-BR10 / Минимальная версия Junos/EVO — условия источника

ACX7100-48L: 22.2R1-EVO ACX7024: 23.1R1-EVO

25GBASE-BR10 / Диапазон рабочей температуры

-40C to 85C

25GBASE-BR10 / Optic Type (Commercial Vs Service Provider Grade)

Industry

25GBASE-BR10 / Диапазон длин волн приёмника

1320 to 1340 nm

25GBASE-BR10 / Receiver input power (maximum)

+2 dBm

25GBASE-BR10 / Receiver input power (minimum)

-13.3 dBm

25GBASE-BR10 / Receiver sensitivity (OMA), each lane (maximum)

-12 dBm

25GBASE-BR10 / Signaling rate

25.78125GBd ± 100 ppm

25GBASE-BR10 / Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4)

25GBASE-BR10

25GBASE-BR10 / Температура хранения

-40C to 85C

25GBASE-BR10 / Stressed receiver sensitivity (OMA) (maximum)

-9.5 dBm

25GBASE-BR10 / Transmitter RMS spectral width (maximum)

(for MM only)

25GBASE-BR10 / Transmitter fibers

1

25GBASE-BR10 / Transmitter output power (maximum)

+2 dBm

25GBASE-BR10 / Transmitter output power (minimum)

-7 dBm

25GBASE-BR10 / Диапазон длин волн передатчика

1260 to 1280 nm

25GBASE-BR10 / Typical Weight & Dimensions

Weight: 0.15 kg Height: 8.55 mm Width: 13.55 mm Depth: 57.5 mm

Ограничения подбора по документации

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred.

Источник характеристик: Juniper ↗
Проверено по документации: 19.10.2026