- MPN / P/N
- RB912R-2nD-LTm&EC200A-EU
- Обозначение производителя
- LtAP mini LTE kit
- Architecture
- MIPSBE
- CPU
- QCA9531
- CPU core count
- 1
- CPU nominal frequency
- 650 MHz
- RouterOS license
- 4
- Operating System
- RouterOS v7
- Size of RAM
- 64 MB
- Storage size
- 16 MB
- Storage type
- FLASH
- MTBF
- Approximately 100'000 hours at 25C
- Tested ambient temperature
- -40°C to 70°C
- MicroUSB input Voltage
- 5 V
- Number of DC inputs
- 3 (DC jack, PoE-IN, MicroUSB)
- DC jack input Voltage
- 8-30 V
- Max power consumption
- 8 W
- Питание PoE на входе
- 802.3af/at
- Cooling type
- Passive
- PoE in input Voltage
- 12-57 V
- 2G Category
- Class12
- 2G bands
- 3 (1800MHz) ; 8 (900MHz)
- 3G Category
- R7 (21Mbps Downlinks, 5.76Mbps Uplink)
- 3G bands
- 1 (2100MHz) ; 5 (850MHz) ; 8 (900MHz)
- LTE Category
- 4 (150Mbps Downlink, 50Mbps Uplink)
- MIMO DL
- 2x2
- MIMO UL
- 1x1
- LTE FDD bands
- 1 (2100MHz) ; 3 (1800MHz) ; 5 (850MHz) ; 7 (2600MHz) ; 8 (900 MHz) ; 20 (800MHz) ; 28 (700MHz)
- LTE TDD bands
- 38 (2600MHz) ; 40 (2300MHz) ; 41n (2500MHz)
- TAC
- 86314105
- Wireless 2.4 GHz Max data rate
- 300 Mbit/s
- Wireless 2.4 GHz Number of chains
- 2
- Wireless 2.4 GHz standards
- 802.11b/g/n
- Antenna gain dBi for 2.4 GHz
- 1.5
- Wireless 2.4 GHz chip model
- QCA9531
- Wireless 2.4 GHz generation
- Wi-Fi 4
- 10/100 Ethernet ports
- 1
- Number of SIM slots
- 2 Modem (Mini SIM)
- MiniPCI-e slots
- 1
- Serial console port
- RS232
- Mode button
- Yes
- GNSS standards
- GPS
- GPS RF connector type
- uUFL
- Certification
- CE, E-MARK, EAC, ROHS
- IP
- IP54
- Ограничения подбора
- Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.