Juniper SFP-1GE-LX · 740-031850

MPN / P/N

740-031850

Ishlab chiqaruvchi modeli

SFP-1GE-LX

Zavod raqami

740-031850

Liniya tezligi — hujjat bo‘yicha

Gigabit Ethernet

Breakout — platforma cheklovlari bilan

No

Format

SFP

Mahsulot turi

Optical Transceiver

Ulagich

Duplex LC PC/UPC

Monitoring mavjudligi

Yes

Raqamli optik monitoring

Yes

1000BASE-LX / Kabel / tola turi

SMF | MMF | MMF

1000BASE-LX / Yadro / qoplama o‘lchami

- | 62.5 µm (Refer the note below) | 50 µm (Refer the note below) Note: According to IEEE Std 802.3-2018, Clause 38.11.14. An offset-launch mode-conditioning patch cord is required for MMF operation of 1000BASE-LX. o If the cabling is 62.5m MMF then the MMF used in the construction of the mode conditioner should be of type 62.5m MMF. o If the cabling is 50m MMF, then the MMF used in the construction of the mode conditioner should be of type 50m MMF.

1000BASE-LX / Digital Diagnostic Monitoring

Tx Power Rx Power Tx Bias Current Case Temperature Power Supply Voltage

1000BASE-LX / Masofa / uzunlik — profil shartlari bilan

10 km | 550 m | 550 m

1000BASE-LX / Effective modal bandwidth

- | 500 MHz x km | 500 MHz x km

1000BASE-LX / MSA compliance (SFF, for e.g. SFF-8665)

INF-8074i

1000BASE-LX / Maksimal quvvat sarfi

1 W

1000BASE-LX / Ishlash harorati oralig‘i

–5° C to 70° C

1000BASE-LX / Optic Type (Commercial Vs Service Provider Grade)

Commercial

1000BASE-LX / Qabul kanali to‘lqin uzunligi oralig‘i

1270 nm to 1355 nm

1000BASE-LX / Har kanal maksimal kirish quvvati

-3 dBm

1000BASE-LX / Har kanal minimal kirish quvvati

-19 dBm

1000BASE-LX / Har bir kanal signal tezligi

1.25 Gbps

1000BASE-LX / Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4)

1000BASE-LX

1000BASE-LX / Saqlash harorati

–40° C to 85° C

1000BASE-LX / Stressed receiver sensitivity (OMA) each lane (maximum)

-14.4 dBm

1000BASE-LX / Har kanal maksimal chiqish quvvati

-3 dBm

1000BASE-LX / Har kanal minimal chiqish quvvati

-9.5 dBm

1000BASE-LX / Uzatgich to‘lqin uzunligi oralig‘i

1270 nm to 1355 nm

1000BASE-LX / Typical Weight & Dimensions

Weight: 0.15 kg Height: 8.55 mm Width: 13.55 mm Depth: 57.5 mm

Hujjatdagi tanlash cheklovlari

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred. Parallel fiber/core/modal-bandwidth/distance values retain the same source column order; correlate matching columns instead of applying the largest distance to every fiber.

Parallel qiymatlarni o‘qish

Tola, polosa va masofaning | bilan ajratilgan qiymatlari ishlab chiqaruvchi jadvali ustun tartibida bir xil pozitsiyaga mos keladi. Eng uzoq masofa har bir tolaga tegishli emas.

Xususiyatlar manbasi: Juniper ↗
Hujjat bo‘yicha tekshirildi: 19.10.2026