Juniper QSFP-100G-4WDM40 · 740-093290

MPN / P/N

740-093290

Ishlab chiqaruvchi modeli

QSFP-100G-4WDM40

Zavod raqami

740-093290

Liniya tezligi — hujjat bo‘yicha

100 Gigabit Ethernet

Breakout — platforma cheklovlari bilan

No

Format

QSFP28

Mahsulot turi

Optical Transceiver

Ulagich

Duplex LC PC/UPC

Monitoring mavjudligi

Yes

Raqamli optik monitoring

Yes

100G 4WDM-40 / Kabel / tola turi

SMF

100G 4WDM-40 / Yadro / qoplama o‘lchami

9/125 µm

100G 4WDM-40 / Digital Diagnostic Monitoring

Transceiver Temperature Transceiver Supply Voltage Tx Bias Current Tx output power Rx received optical power

100G 4WDM-40 / Masofa / uzunlik — profil shartlari bilan

40 km

100G 4WDM-40 / MSA compliance (SFF, for e.g. SFF-8665)

SFF-8636

100G 4WDM-40 / Maksimal quvvat sarfi

4.5 W

100G 4WDM-40 / Ishlash harorati oralig‘i

0° C to 70° C

100G 4WDM-40 / Qabul kanali to‘lqin uzunligi oralig‘i

1294.53 nm through 1296.59 nm 1299.02 nm through 1301.09 nm 1303.54 nm through 1305.63 nm 1308.09 nm through 1310.19 nm

100G 4WDM-40 / Har kanal maksimal kirish quvvati

-3.5 dBm (Note: This transceiver is intended for long reach applications with high Tx power, appropriate optical attenuation is required on shorter links)

100G 4WDM-40 / Har kanal minimal kirish quvvati

-20.5 dBm

100G 4WDM-40 / Receiver sensitivity (OMA), each lane (maximum)

-3.5 dBm

100G 4WDM-40 / Har bir kanal signal tezligi

25.78125 GBd +/- 100 ppm

100G 4WDM-40 / Saqlash harorati

–40° C to 85° C

100G 4WDM-40 / Stressed receiver sensitivity (OMA) each lane (maximum)

-16.0 dBm

100G 4WDM-40 / Transmitter fibers

1

100G 4WDM-40 / Har kanal maksimal chiqish quvvati

6.5 dBm

100G 4WDM-40 / Har kanal minimal chiqish quvvati

-2.5 dBm

100G 4WDM-40 / Uzatgich to‘lqin uzunligi oralig‘i

1294.53 nm through 1296.59 nm 1299.02 nm through 1301.09 nm 1303.54 nm through 1305.63 nm 1308.09 nm through 1310.19 nm

100G 4WDM-40 / Typical Weight & Dimensions

Weight: 100 gram Height: 13.5 mm Width: 18.4 mm Depth: 72.4 mm

Hujjatdagi tanlash cheklovlari

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred.

Xususiyatlar manbasi: Juniper ↗
Hujjat bo‘yicha tekshirildi: 19.10.2026