Juniper QSFP-100G-SR4-ET · 740-099582

MPN / P/N

740-099582

Ishlab chiqaruvchi modeli

QSFP-100G-SR4-ET

Zavod raqami

740-099582

Liniya tezligi — hujjat bo‘yicha

100 Gigabit Ethernet

Breakout — platforma cheklovlari bilan

No

Format

QSFP28

Mahsulot turi

Optical Transceiver

Ulagich

MPO-12 PC/UPC

Monitoring mavjudligi

Yes

Raqamli optik monitoring

Yes

IEEE 802.3-2018 / Kabel / tola turi

MMF

IEEE 802.3-2018 / Yadro / qoplama o‘lchami

50/125 µm

IEEE 802.3-2018 / Digital Diagnostic Monitoring

Transceiver Temperature Transceiver Supply Voltage Tx Bias Current Tx output power Rx received optical power

IEEE 802.3-2018 / Masofa / uzunlik — profil shartlari bilan

70 m | 100 m

IEEE 802.3-2018 / Effective modal bandwidth

2000 MHz x km | 4700 MHz x km

IEEE 802.3-2018 / Tola sinfi

OM3 | OM4

IEEE 802.3-2018 / MSA compliance (SFF, for e.g. SFF-8665)

SFF-8636

IEEE 802.3-2018 / Maksimal quvvat sarfi

3.5 W

IEEE 802.3-2018 / Ishlash harorati oralig‘i

0° C to 85° C

IEEE 802.3-2018 / Qabul kanali to‘lqin uzunligi oralig‘i

840 nm to 860 nm

IEEE 802.3-2018 / Har kanal maksimal kirish quvvati

2.4 dBm

IEEE 802.3-2018 / Har kanal minimal kirish quvvati

-10.3 dBm

IEEE 802.3-2018 / Receiver sensitivity (OMA), each lane (maximum)

3.0 dBm

IEEE 802.3-2018 / Har bir kanal signal tezligi

25.78125 GBd +/- 100 ppm

IEEE 802.3-2018 / Saqlash harorati

–40° C to 85° C

IEEE 802.3-2018 / Stressed receiver sensitivity (OMA) each lane (maximum)

-5.2 dBm

IEEE 802.3-2018 / Transmitter RMS spectral width (maximum)

0.6 nm

IEEE 802.3-2018 / Transmitter fibers

4

IEEE 802.3-2018 / Har kanal maksimal chiqish quvvati

2.4 dBm

IEEE 802.3-2018 / Har kanal minimal chiqish quvvati

-8.4 dBm

IEEE 802.3-2018 / Uzatgich to‘lqin uzunligi oralig‘i

840 nm to 860 nm

IEEE 802.3-2018 / Typical Weight & Dimensions

Weight: 100 gram Height: 13.5 mm Width: 18.4 mm Depth: 72.4 mm

Hujjatdagi tanlash cheklovlari

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred. Parallel fiber/core/modal-bandwidth/distance values retain the same source column order; correlate matching columns instead of applying the largest distance to every fiber.

Parallel qiymatlarni o‘qish

Tola, polosa va masofaning | bilan ajratilgan qiymatlari ishlab chiqaruvchi jadvali ustun tartibida bir xil pozitsiyaga mos keladi. Eng uzoq masofa har bir tolaga tegishli emas.

Xususiyatlar manbasi: Juniper ↗
Hujjat bo‘yicha tekshirildi: 19.10.2026