Juniper SFP-25G-BX40U-I · 740-108161

MPN / P/N

740-108161

Ishlab chiqaruvchi modeli

SFP-25G-BX40U-I

Zavod raqami

740-108161

Breakout — platforma cheklovlari bilan

No

MSA compliance (SFF, for e.g. SFF-8665)

SFF-8472 Rev 12.2 and SFF-8402

Format

SFP28

Mahsulot turi

Optical Transceiver

Ulagich

Simplex LC PC/UPC

25GBASE-BR40 / Kabel / tola turi

SMF

25GBASE-BR40 / Yadro / qoplama o‘lchami

9/125 µm

25GBASE-BR40 / Digital Diagnostic Monitoring

Temperature Supply voltage TX bias current TX power RX power

25GBASE-BR40 / Masofa / uzunlik — profil shartlari bilan

40 km

25GBASE-BR40 / Effective modal bandwidth

(for MM only)

25GBASE-BR40 / Tola sinfi

(for MM only)

25GBASE-BR40 / Form Factor (i.e., SFP, SFP+, XFP, CFP, etc..)

SFP28

25GBASE-BR40 / Maksimal quvvat sarfi

1.8W

25GBASE-BR40 / Minimal Junos/EVO versiyasi — manba shartlari

23.1R1-EVO (ACX7024) 22.2R1-EVO (ACX7100-48L)

25GBASE-BR40 / Ishlash harorati oralig‘i

SFP-25G-BX40U-I: -40C to 85C SFP-25G-BX40D-I: -40C to 85C

25GBASE-BR40 / Optic Type (Commercial Vs Service Provider Grade)

Commercial

25GBASE-BR40 / Qabul kanali to‘lqin uzunligi oralig‘i

SFP-25G-BX40U-I: 1300 to 1320 nm SFP-25G-BX40D-I: 1260 to 1280 nm

25GBASE-BR40 / Har kanal maksimal kirish quvvati

-4 dBm

25GBASE-BR40 / Har kanal minimal kirish quvvati

-21 dBm

25GBASE-BR40 / Receiver sensitivity (OMA), each lane (maximum)

-19 dBm

25GBASE-BR40 / Har bir kanal signal tezligi

25.78125GBd ± 100 ppm

25GBASE-BR40 / Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4)

25GBASE-BR40

25GBASE-BR40 / Saqlash harorati

-40C to 85C

25GBASE-BR40 / Stressed receiver sensitivity (OMA) each lane (maximum)

-16.5 dBm

25GBASE-BR40 / Transmitter RMS spectral width (maximum)

(for MM only)

25GBASE-BR40 / Transmitter fibers

1

25GBASE-BR40 / Transmitter output power (maximum)

+6 dBm

25GBASE-BR40 / Transmitter output power (minimum)

-1 dBm

25GBASE-BR40 / Uzatgich to‘lqin uzunligi oralig‘i

SFP-25G-BX40U-I: 1260 to 1280 nm SFP-25G-BX40D-I: 1300 to 1320 nm

Hujjatdagi tanlash cheklovlari

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred.

Xususiyatlar manbasi: Juniper ↗
Hujjat bo‘yicha tekshirildi: 19.10.2026