- MPN / P/N
- DP2VGDVHD
- Ishlab chiqaruvchi belgilanishi
- Travel A/V adapter: 3-in-1 DisplayPort to VGA DVI or HDMI converter
- Special Notes
- Only one video output is supported on the video adapter at a; time. If multiple connections are made, only one of the outputs; will function.; The HDMI port is a passive port.; The DVI-D is a passive port.; The VGA port is an active port.; Maximum Cable Distance to Display refers to digital video. VGA; distance capabilities are dependent upon the quality of your; cabling
- Rang
- Black
- Kabel uzunligi
- 5.9 in [15 cm]
- Product Length
- 10.5 in [26.6 cm]
- Product Width
- 1.8 in [45.0 mm]
- Product Height
- 0.8 in [20.0 mm]
- Weight of Product
- 2.3 oz [65.0 g]
- Operating Temperature
- 0C to 45C (32F to 113F)
- Storage Temperature
- -10C to 80C (14F to 176F)
- Humidity
- 10%-85%RH
- HDR Support
- No
- Maximum Cable Distance
- 49.9 ft [15.2 m]; To Display
- Audio Specifications
- DVI - No Audio Support; HDMI - 7.1 Channel Audio; VGA - No Audio Support
- Maximum Analog Resolutions
- 1920x1200/1080p
- Maximum Digital Resolutions
- 1920x1200/1080p
- Wide Screen Supported
- Yes
- Aktiv yoki passiv turi
- Active
- AV Input
- DisplayPort - 1.2
- AV Output
- DVI-D - Single-Link; HDMI - 1.4; VGA
- Audio
- Yes
- Number of Displays
- 1
- Chipset ID
- Analogix Semiconductor ANX9833; Parade Technologies Inc. PS8339B
- Connector 1 (Quantity)
- 1
- Ulagich 1 — manba belgisi
- DisplayPort
- Connector 2 (Quantity)
- 1
- Ulagich 2 — manba belgisi
- DVI-D Dual-Link (25-Pin)
- Connector 3 (Quantity)
- 1
- Connector 3
- VGA
- Connector 4 (Quantity)
- 1
- Connector 4
- HDMI
- Hujjatdagi tanlash cheklovlari
- Match the exact connector at each end, cable length, interface generation and host/device requirements. Published data rates, power ratings and display modes are maximum conditional limits, not guaranteed application results. A physically matching connector alone does not establish protocol, charging, video or device compatibility. A source-to-display converter can be directional; reverse operation is not implied. Active/optical cable orientation and source/display capability must follow the individual datasheet. DSC/refresh-rate modes are conditional where specified.