Juniper JNP-100G-2X50G-3M · 720-068906

MPN / P/N

720-068906

Manufacturer model

JNP-100G-2X50G-3M

Part Number

720-068906

Speed

2 x 50 Gigabit Ethernet

Breakout Capable

Yes

Form Factor

QSFP28

Product Type

DAC

Connector

None

100GBASE-CR4 / Cable type

Twinax copper

100GBASE-CR4 / Distance

3 m

100GBASE-CR4 / MSA compliance (SFF, for e.g. SFF-8665)

SFF-8636

100GBASE-CR4 / Maximum Power consumption (W)

1.5 W

100GBASE-CR4 / Minimum cable bend radius

45 mm

100GBASE-CR4 / Operating Temperature (range)

0° C to 70° C

100GBASE-CR4 / Signaling rate, each lane

25.78125 Gbps

100GBASE-CR4 / Storage temperature

–40° C to 85° C

100GBASE-CR4 / Typical Weight & Dimensions

Weight: N/A Height: 13.5 mm Width: 18.4 mm Depth: 72.4 mm

100GBASE-CR4 / Wire AWG

26 AWG

Documented selection limits

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred.

Integral-cable metadata note

HCT Connector=None is integral DAC/AOC metadata, not an absence of cable ends. Verify end form factors and breakout against the exact manufacturer profile.

Specification source: Juniper ↗
Checked against documentation: 19.10.2026