Juniper JNP-100G-4X25G-5M · 720-071265

MPN / P/N

720-071265

Manufacturer model

JNP-100G-4X25G-5M

Part Number

720-071265

Speed

4 x 25 Gigabit Ethernet, 100 Gigabit Ethernet

Breakout Capable

Yes

Form Factor

QSFP28 to SFP28

Product Type

DAC

Connector

None

Monitoring Available

Yes

Digital Optical Monitoring

Yes

QSFP28-DAC / Active or passive

Passive

QSFP28-DAC / Cable type

Twinax copper

QSFP28-DAC / Distance

5 m

QSFP28-DAC / MSA compliance (SFF, for e.g. SFF-8665)

QSFP+ SFF-8661 SFP+ SFF-8432

QSFP28-DAC / Maximum Power consumption (W)

0.5 W

QSFP28-DAC / Minimum cable bend radius

4.5 cm

QSFP28-DAC / Operating Temperature (range)

0° C to 70°C (32° C to 158° F)

QSFP28-DAC / Optic Type (Commercial Vs Service Provider Grade)

Commercial

QSFP28-DAC / Signaling rate, each lane

100-Gbps full-duplex serial transmission

QSFP28-DAC / Storage temperature

0° C to 70° C (32° C to 158° F)

QSFP28-DAC / Typical Weight & Dimensions

5000mm

QSFP28-DAC / Wire AWG

26 AWG

Documented selection limits

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred.

Integral-cable metadata note

HCT Connector=None is integral DAC/AOC metadata, not an absence of cable ends. Verify end form factors and breakout against the exact manufacturer profile.

Specification source: Juniper ↗
Checked against documentation: 19.10.2026