Juniper JNP-SFP-25G-DAC-5M · 720-084606

MPN / P/N

720-084606

Manufacturer model

JNP-SFP-25G-DAC-5M

Part Number

720-084606

Speed

25 Gigabit Ethernet

Breakout Capable

No

Form Factor

SFP28

Product Type

DAC

Connector

None

25GBASE-CR / Active or passive

Passive

25GBASE-CR / Cable type

Twinax copper

25GBASE-CR / Distance

5 m

25GBASE-CR / Form Factor (i.e., SFP, SFP+, XFP, CFP, etc..)

SFP28

25GBASE-CR / MSA compliance (SFF, for e.g. SFF-8665)

SFF-8402

25GBASE-CR / Maximum Power consumption (W)

0.5 W

25GBASE-CR / Minimum cable bend radius

45 mm

25GBASE-CR / Operating Temperature (range)

0° C to 70° C

25GBASE-CR / Signaling rate, each lane

25.78125 GBd ± 100 ppm

25GBASE-CR / Storage temperature

–40° C to 85° C

25GBASE-CR / Typical Weight & Dimensions

Weight: N/A Height: 8.55 mm Width: 13.55 mm Depth: 57.5 mm

25GBASE-CR / Wire AWG

26 AWG

Documented selection limits

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred.

Integral-cable metadata note

HCT Connector=None is integral DAC/AOC metadata, not an absence of cable ends. Verify end form factors and breakout against the exact manufacturer profile.

Specification source: Juniper ↗
Checked against documentation: 19.10.2026