Juniper OSFP-800G-DAC-1M · 720-179279

MPN / P/N

720-179279

Manufacturer model

OSFP-800G-DAC-1M

Part Number

720-179279

Breakout Capable

Yes

Breakout cables

No

MSA compliance (SFF, for e.g. SFF-8665)

CMIS 5.0

Form Factor

OSFP800

Product Type

DAC

Connector

None

800GBASE-CR8 / Active or passive

Passive

800GBASE-CR8 / Digital Diagnostic Monitoring

No

800GBASE-CR8 / Distance

1 m

800GBASE-CR8 / Maximum Power consumption (W)

0.5W

800GBASE-CR8 / Minimum cable bend radius

19 mm

800GBASE-CR8 / Operating Temperature (range)

0°C to 70°C

800GBASE-CR8 / Signaling rate, each lane

53.125GBd, PAM4

800GBASE-CR8 / Storage temperature

-40°C to 85°C

800GBASE-CR8 / Typical Weight & Dimensions

0.3kg

800GBASE-CR8 / Wire AWG

32 AWG

Not Applicable / Cable type

Twinax copper

Documented selection limits

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred.

Integral-cable metadata note

HCT Connector=None is integral DAC/AOC metadata, not an absence of cable ends. Verify end form factors and breakout against the exact manufacturer profile.

Specification source: Juniper ↗
Checked against documentation: 19.10.2026