Juniper JNP-100G-DAC-1M · 740-061000

MPN / P/N

740-061000

Manufacturer model

JNP-100G-DAC-1M

Part Number

740-061000

Speed

100 Gigabit Ethernet

Breakout Capable

No

Form Factor

QSFP28

Product Type

DAC

Connector

None

QSFP28-DAC / Cable type

Twinax copper

QSFP28-DAC / Distance

1 m

QSFP28-DAC / MSA compliance (SFF, for e.g. SFF-8665)

Annex 92A/SFF-8636/SFF-8679/SFF-8661/SFF-8663/SFF-8665

QSFP28-DAC / Maximum Power consumption (W)

0.5 W

QSFP28-DAC / Operating Temperature (range)

0° C to 70° C

QSFP28-DAC / Signaling rate, each lane

100-Gbps full-duplex serial transmission

QSFP28-DAC / Storage temperature

–40° C to 85° C

QSFP28-DAC / Wire AWG

30 AWG

Documented selection limits

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred.

Integral-cable metadata note

HCT Connector=None is integral DAC/AOC metadata, not an absence of cable ends. Verify end form factors and breakout against the exact manufacturer profile.

Specification source: Juniper ↗
Checked against documentation: 19.10.2026