Juniper JNP-QSFP-100G-PSM4 · 740-061406

MPN / P/N

740-061406

Manufacturer model

JNP-QSFP-100G-PSM4

Part Number

740-061406

Speed

4 x 25 Gigabit Ethernet, 100 Gigabit Ethernet

Breakout Capable

Yes

Breakout cables

MTP-4LC-S1M, MTP-4LC-S3M, MTP-4LC-S5M, MTP-4LC-S10M can be used as break-out cables

Form Factor

QSFP28

Product Type

Optical Transceiver

Connector

MPO-12 APC

Monitoring Available

Yes

Digital Optical Monitoring

Yes

100G PSM4 MSA / Cable type

SMF

100G PSM4 MSA / Core size/cladding

9/125 µm

100G PSM4 MSA / Diagnostic support

Yes

100G PSM4 MSA / Distance

500 m

100G PSM4 MSA / Maximum Power consumption (W)

3.5 W

100G PSM4 MSA / Operating Temperature (range)

0° C to 70° C

100G PSM4 MSA / Receiver input power, each lane (maximum)

2.0 dBm

100G PSM4 MSA / Receiver input power, each lane (minimum)

–12.66 dBm

100G PSM4 MSA / Signaling rate, each lane

25.78125 GBd +/- 100 ppm

100G PSM4 MSA / Storage temperature

–40° C to 85° C

100G PSM4 MSA / Transmitter output power, each lane (maximum)

2.0 dBm

100G PSM4 MSA / Transmitter output power, each lane (minimum)

–9.4 dBm

100G PSM4 MSA / Transmitter wavelengths (range)

1295 nm through 1325 nm

Documented selection limits

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred. Other model designations map to the same Part Number in HCT; primary specifications remain from JNP-QSFP-100G-PSM4 only.

Other designations for the same P/N — verify HCT profile

QSFP-100G-PSM4-T2

Specification source: Juniper ↗
Checked against documentation: 19.10.2026