Juniper QSFP-100G-ZR4 · 740-120240

MPN / P/N

740-120240

Manufacturer model

QSFP-100G-ZR4

Part Number

740-120240

Speed

100 Gigabit Ethernet

Breakout Capable

No

Form Factor

QSFP28

Product Type

Optical Transceiver

Connector

Duplex LC PC/UPC

Monitoring Available

Yes

Digital Optical Monitoring

Yes

Juniper Custom / Cable type

SMF

Juniper Custom / Core size/cladding

9/125 µm

Juniper Custom / Digital Diagnostic Monitoring

Transceiver Temperature Transceiver Supply Voltage Tx Bias Current Tx output power Rx received optical power

Juniper Custom / Distance

2 m to 60 km

Juniper Custom / Distance / source qualification

For distance beyond 60 km, check the Additional Information for more details.

Juniper Custom / MSA compliance (SFF, for e.g. SFF-8665)

SFF-8636

Juniper Custom / Maximum Power consumption (W)

5.5 W

Juniper Custom / Operating Temperature (range)

0° C to 70° C

Juniper Custom / Receive lane wavelengths (range)

1294.53nm to 1296.59nm 1299.02nm to 1301.09nm 1303.54nm to 1305.63nm 1308.09nm to 1310.19nm

Juniper Custom / Receiver input power, each lane (maximum)

4.5 dBm

Juniper Custom / Receiver input power, each lane (minimum)

-28 dBm

Juniper Custom / Receiver sensitivity (OMA), each lane (maximum)

-26.5 dBm

Juniper Custom / Signaling rate, each lane

25.78125 Gbd, +/-100ppm

Juniper Custom / Storage temperature

–40° C to 85° C

Juniper Custom / Stressed receiver sensitivity (OMA) each lane (maximum)

-26.5 dBm

Juniper Custom / Transmitter fibers

1

Juniper Custom / Transmitter output power, each lane (maximum)

+7 dBm

Juniper Custom / Transmitter output power, each lane (minimum)

+2 dBm

Juniper Custom / Transmitter wavelengths (range)

1294.53nm to 1296.59nm 1299.02nm to 1301.09nm 1303.54nm to 1305.63nm 1308.09nm to 1310.19nm

Juniper Custom / Typical Weight & Dimensions

Weight: 100 gram Height: 8.5 mm Width: 18.35 mm Depth: 72.56 mm

Documented selection limits

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred. Standard reach in the table is 2 m–60 km. Longer links require an engineered attenuation/connector/TDP budget, not an unconditional 80 km claim. Fully populated QFX AFI chassis have separate altitude-dependent ambient limits in sourceQualifications; the module operating-temperature range is not a chassis ambient guarantee.

HCT interoperability and reach qualifications

QSFP-100G-ZR4 has a tabulated reach of 2 m–60 km; longer links require separate loss-budget engineering, not an unconditional rating. With every QSFP28 port populated by these optics, AFI chassis ambient limits at sea level / 6000 ft are: QFX5120-48YM 43/37°C; QFX5210-64C 42/36°C; QFX5120-48T 34/28°C. The named AFO versions do not receive this reduction. Module temperature is not the chassis ambient rating.

Specification source: Juniper ↗
Checked against documentation: 19.10.2026