Juniper QSFP-100G-SR1P2 · 740-158998

MPN / P/N

740-158998

Manufacturer model

QSFP-100G-SR1P2

Part Number

740-158998

Breakout Capable

No

MSA compliance (SFF, for e.g. SFF-8665)

SFF-8665 Rev 1.9 SFF-8636 Rev 2.10a SFF-8024 Rev 2.9

Form Factor

QSFP28

Product Type

Optical Transceiver

Connector

Duplex LC PC/UPC

Monitoring Available

Yes

Digital Optical Monitoring

Yes

IEEE Std 802.3cm-2020 / Cable type

MMF

IEEE Std 802.3cm-2020 / Core size/cladding

50μm

IEEE Std 802.3cm-2020 / Digital Diagnostic Monitoring

Transceiver Temperature Transceiver Supply Voltage Tx Bias Current Tx output power Rx received optical power

IEEE Std 802.3cm-2020 / Distance

0.5 m to 70 m for OM3 0.5 m to 100 m for OM4 0.5 m to 150 m for OM5

IEEE Std 802.3cm-2020 / Effective modal bandwidth

OM3: 2000 MHz x km OM4: 4700 MHz x km OM5: 4700 MHz x km

IEEE Std 802.3cm-2020 / Fiber grade

OM3, OM4, OM5

IEEE Std 802.3cm-2020 / Maximum Power consumption (W)

4.0W

IEEE Std 802.3cm-2020 / Operating Temperature (range)

0° C to 70° C

IEEE Std 802.3cm-2020 / Receive lane wavelengths (range)

Pair type TR: 0.6 nm Pair type RT: 0.65 nm

IEEE Std 802.3cm-2020 / Receiver input power (maximum)

4 dBm

IEEE Std 802.3cm-2020 / Receiver input power (minimum)

-8.2 dBm

IEEE Std 802.3cm-2020 / Receiver sensitivity (OMA) (maximum)

RS = max(-6.6,SECQ -8)dBm

IEEE Std 802.3cm-2020 / Signaling rate, each lane

Host lane: NRZ; 25.78125 GBd ± 100 ppm Media lane: PAM4; 26.5625 GBd ± 100 ppm

IEEE Std 802.3cm-2020 / Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4)

IEEE Std 802.3cm-2020, (Uses the same channel spec as 400GBASE-SR4.2)

IEEE Std 802.3cm-2020 / Storage temperature

–40° C to 85° C

IEEE Std 802.3cm-2020 / Stressed receiver sensitivity (OMA) each lane (maximum)

-3.5 dBm

IEEE Std 802.3cm-2020 / Transmitter fibers

1

IEEE Std 802.3cm-2020 / Transmitter output power (maximum)

4 dBm

IEEE Std 802.3cm-2020 / Transmitter output power (minimum)

-6.2 dBm

IEEE Std 802.3cm-2020 / Transmitter wavelengths (range)

Pair type TR: 844 to 863 nm Pair type RT: 900 to 918 nm

IEEE Std 802.3cm-2020 / Typical Weight & Dimensions

Weight: 0.2 kg Height: 13.5 mm Width: 18.35 mm Depth: 72.4 mm

Documented selection limits

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred.

Specification source: Juniper ↗
Checked against documentation: 19.10.2026