- MPN / P/N
- 4Y37A97937
- Reference-part status
- Reference part: the code is listed under Legacy/EOL or Withdrawn documentation. For installed-equipment replacement research; confirm exact current lifecycle and availability.
- Manufacturer model
- RAID 9450-16i
- Adapter type
- RAID controller
- Internal or External ports
- Internal
- Feature code
- C8B9, C6UK
- Form factor
- PCIe low profile
- Controller chip
- Microchip Excalibur SmartROC 3200
- Vendor equivalent
- SmartRAID 3258-16i
- Host interface
- PCIe 4.0 x8
- Port interface
- 24 Gb SAS
- Number of ports
- 16
- Port connectors
- Two x8 SFF-8654
- Drive interface
- SAS, SATA (U.2 NVMe planned)
- Drive type
- HDD, SSD, SED
- Hot-swap drives
- Yes
- Max physical drives
- 16
- Max physical drives (with expander)
- 238
- Max logical drives
- 64
- RAID levels
- 0, 1, 10, 5, 50, 6, 60, 1 Triple, 10 Triple
- JBOD mode
- Yes
- Cache
- 8GB (Standard)
- Cache protection with Flash and Supercap
- Yes
- Performance Accelerator (FastPath)
- No
- SSD Caching (CacheCade Pro 2.0)
- No
- SED support (see Note 2)
- Yes
- Remote management - Controller FW update (XCC/BMC) (see Note 5)
- Yes
- Remote management - Inventory (XCC/BMC) (see Note 5)
- Yes
- Remote management - RAID setup (XCC/BMC) (see Note 5)
- Yes
- Manufacturer lifecycle
- Withdrawn (live Lenovo Press reference, checked 2026-10-19)
- Manufacturer withdrawal date
- 2025-11-30
- Documented selection limits
- Use only the approved ThinkSystem server, slot/riser, backplane and correct cable/firmware configuration. Port count, direct physical-drive limit and expander-qualified drive limit are separate source fields. HBA passthrough is not hardware RAID. Flash/supercap support does not imply an optional module is supplied; consult the exact option guide. NVMe U.3 Tri-Mode x1 and NVMe-only U.2 x4 configurations are different and not simultaneous universal support; feature codes/CH5Z enablement and host cabling must be verified for RAID 940. Planned U.2 support stays planned, not a delivered feature. SED support on HBAs is host-software pass-through, not a bundled encryption/key-management service. Remote management exclusions and blade drive-count limits in sourceQualifications apply. Withdrawn hardware is recorded for installed-equipment reference/replacement, not current production or stock availability.
- Manufacturer qualifications — required for selection
- Note 1: RAID 730-8i 1GB is available world-wide except USA and Canada
Note 2: SAS HBAs support SEDs by host software passing SED commands through the HBA to the drives.
Note 3: SN550 blade 4i adapters are limited to two drives and RAID 0/1; SN850 has four drives and applicable RAID modes depend on the exact adapter.
Note 5: SR635/SR655/SR645/SR665 with second-generation AMD EPYC (Rome) processors do not support remote management.