MikroTik hAP ax S · E62iUGS-2axD5axT

MPN / P/N

E62iUGS-2axD5axT

Manufacturer designation

hAP ax S

Architecture

ARM 32bit

CPU

EN7562CT

CPU core count

2

CPU nominal frequency

950 MHz

CPU Threads count

2

Switch chip model

EN7523

RouterOS license

4

Operating System

RouterOS v7

Size of RAM

512 MB

Storage size

128 MB

Storage type

NAND

MTBF

Approximately 100'000 hours at 25C

Tested ambient temperature

-40°C to 70°C

Wireless 2.4 GHz Max data rate

574 Mbit/s

Wireless 2.4 GHz Number of chains

2

Wireless 2.4 GHz standards

802.11b/g/n/ax

Antenna gain dBi for 2.4 GHz

5.5

Wireless 2.4 GHz chip model

MT7916

Wireless 2.4 GHz generation

Wi-Fi 6

Wireless 5 GHz Max data rate

2400 Mbit/s

Wireless 5 GHz Number of chains

3

Wireless 5 GHz standards

802.11a/n/ac/ax

Antenna gain dBi for 5 GHz

6.5

Wireless 5 GHz chip model

MT7976

Wireless 5 GHz generation

Wi-Fi 6

WiFi speed

AX3000

10/100/1000 Ethernet ports

5

Number of 1G Ethernet ports with PoE-out

1

SFP ports

1 (2.5G supported)

Number of USB ports

1

USB Power Reset

Yes

USB slot type

USB type A

Max USB current (A)

1

Number of DC inputs

2 (DC jack, PoE-IN)

DC jack input Voltage

12-28 V

Max power consumption

34 W

Max power consumption without attachments

11 W

PoE input power

Passive PoE

Cooling type

Passive

PoE in input Voltage

18-28 V

PoE-out ports

Ether5

PoE output power

Passive PoE

Low voltage PoE-Out current limit

0.6 A

Max total out (A)

0.6 A

Total output current

0.6

Total output power

16.8

Certification

CE, FCC, IC, EAC, ROHS

IP

20

CPU temperature monitor

Yes

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Specification source: MikroTik ↗
Checked against documentation: 16.10.2026