MikroTik hEX PoE · RB960PGS

MPN / P/N

RB960PGS

Manufacturer designation

hEX PoE

Architecture

MIPSBE

CPU

QCA9557

CPU core count

1

CPU nominal frequency

800 MHz

Switch chip model

QCA8337

RouterOS license

4

Operating System

RouterOS

Size of RAM

128 MB

Storage size

16 MB

Storage type

FLASH

MTBF

Approximately 100'000 hours at 25C

Tested ambient temperature

-40°C to 60°C

Number of DC inputs

2 (DC jack, PoE-IN)

DC jack input Voltage

12-57 V

Max power consumption

54 W

Max power consumption without attachments

6 W

PoE input power

Passive PoE

Cooling type

Passive

PoE in input Voltage

12-57 V

PoE-out ports

Ether2-Ether5

PoE output power

802.3af/at

Low voltage PoE-Out current limit

1 A

High voltage PoE-Out current limit

450 mA

Max total out (A)

2 A

10/100/1000 Ethernet ports

5

SFP ports

1

Number of USB ports

1

USB Power Reset

Yes

USB slot type

USB type A

Max USB current (A)

1

PCB temperature monitor

Yes

Voltage Monitor

Yes

Beeper

Yes

Certification

CE, EAC, ROHS

IP

IP20

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Specification source: MikroTik ↗
Checked against documentation: 16.10.2026