Supermicro / Server network adapters

Supermicro AOC-STGL-I4T · Server network adapter

Model code: AOC-STGL-I4T

Server network adapter

Server network adapter. Confirm form factor, ports, cables, firmware and OEM-platform restrictions for this code; AIOM, SIOM and microLP are not assumed to be universal PCIe cards. General / item 1: PCIe 4.0 Low Profile Form Factor · General / item 2: Intel E610-XAT2 10GbE Controller with quad RJ45 ports · General / item 3: Multi-speed support: 100MbE, 1GbE, 2.5GbE, 5GbE, 10GbE

Enquire ↗+998 77 161 11 11 ↗ +998 97 741 55 00 ↗
Supermicro AOC-STGL-I4T · Server network adapter — Specification schematic, not a product photograph or installation drawing.
Specification schematic, not a product photograph or installation drawing. Citadex Systems · Specification source
01 / Specifications
Model code
AOC-STGL-I4T
Identifier scope
Official model designation, not a verified ordering part number. Region, revision and bundle require separate confirmation.
Manufacturer model
AOC-STGL-I4T
General / item 1
PCIe 4.0 Low Profile Form Factor
General / item 2
Intel E610-XAT2 10GbE Controller with quad RJ45 ports
General / item 3
Multi-speed support: 100MbE, 1GbE, 2.5GbE, 5GbE, 10GbE
Virtualization Features / item 1
VXLAN
Virtualization Features / item 2
NVGRE
Virtualization Features / item 3
Geneve
Virtualization Features / item 4
SR-IOV
Virtualization Features / item 5
DPDK support
Management and Control / item 1
SMBus 2.0
Management and Control / item 2
Disabled by default in standby mode
Management and Control / item 3
Requires Standby mode Enabled and NC-SI cable to MB with NC-SI header connection.
Management and Control / item 4
*Consult Supermicro for NC-SI and Standby power for more details
Management and Control / item 5
NC-SI, MCTP over SMBus and PCIe
Management and Control / item 6
PLDM for Monitor and Control DSP0248
Management and Control / item 7
PLDM for Firmware Update DSP0267
Management and Control / item 8
PLDM for Redfish Device Enablement Specification (RDE)
Management and Control / item 9
SPDM over MCTP
Remote Boot / item 1
Legacy PXE
Remote Boot / item 2
UEFI support for x86
Stateless Offload / item 1
Large Segment Offload (LSO)
Stateless Offload / item 2
Large Receive Offload (LRO)
Stateless Offload / item 3
Transmit Side Scaling (TSS)
Stateless Offload / item 4
Receive Side Scaling (RSS)
Stateless Offload / item 5
Checksum Offload (TCP/UDP/IP)
Stateless Offload / item 6
TCP Segment Offload (TSO)
Stateless Offload / item 7
UDP Segment Offload (USO)
Standards Compliance / item 1
IEEE 802.3an (10GBASE-T)
Standards Compliance / item 2
IEEE 802.3bz (5/2.5GBASE-T)
Standards Compliance / item 3
IEEE 802.ab (1GBASE-T)
Standards Compliance / item 4
IEEE 802.3u (100BASE-TX)
Standards Compliance / item 5
IEEE 802.3az (Energy Efficient Ethernet)
Standards Compliance / item 6
IEEE 802.1Q, 802.1P (VLAN tags and priority)
Standards Compliance / item 7
IEEE 802.1Qaz (ETS)
Standards Compliance / item 8
IEEE 802.1Qbb (PFC)
Standards Compliance / item 9
IEEE 802.1Qbg
Standards Compliance / item 10
IEEE 1588v2
Standards Compliance / item 11
IEEE 1149.1 (JTAG)
Standards Compliance / item 12
PCI Express Gen 3.0 and 4.0
Power Consumption / item 1
Maximum Power: 10.6W
Operating Conditions / item 1
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Conditions / item 2
Storage Humidity: 90% non-condensing relative humidity at 35°C
Physical Dimensions / item 1
Card PCB Dimensions: 15.001 cm x 6.891 cm (5.906 in X 2.713 in) (L X W)
Documented selection limits
Link speed/ports are supported capabilities, not guaranteed application throughput. Supermicro AIOM, SIOM, microLP and proprietary variants are not interchangeable with ordinary PCIe cards. Check exact chassis/slot form factor, lanes, bracket, airflow, power, firmware, OS and approved optics. No transceiver, cable or host compatibility inferred.

Specification source: Supermicro ↗
Checked against documentation: 17.10.2026

Reference catalogue for quotation requests. Availability, production status, condition, price, lead time and warranty are individually confirmed. A listed part number is not a stock claim.