Supermicro SYS-222BT-HNR

MPN / P/N

SYS-222BT-HNR

Multi-node specification scope

Processor, memory, slot and drive limits apply per node unless explicitly labeled shared-system. Do not merge per-node and shared-system resources.

Supply scope — exact configuration agreed separately

Configurable server platform, not a fixed installed CPU/RAM/storage build. Per-node and shared resources remain separate on multi-node systems.

Manufacturer model

SYS-222BT-HNR

Per-node processor support

Dual Socket E2 (LGA-4710) Intel® Xeon® 6700/6500 series processors with P-cores or 6700 series processors with E-cores up to 205W with air cooling or 350W with liquid cooling

Per-node memory support

Up to 16 DIMMs supporting up to 4TB DDR5-6400 in 1DPC

Per-node networking support

Flexible networking with up to 1 OCP 3.0 compatible AIOM slots

Per-node expansion support

Up to 2 PCIe 5.0 x16 LP + 1 PCIe 5.0 x16 AIOM slots

Per-node storage / backplane support

Up to 6 front hot-swap 2.5" NVMe drive bays

Shared-system power supply configuration

2 Redundant 3600W Titanium Level power supplies

Shared-system chassis / board support

2U Rackmount chassis with 28.75" (730mm) depth

System node topology

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

Chassis height

3.47" (88 mm)

Chassis width

17.68" (449 mm)

Chassis depth

28.75" (730 mm)

Platform form factor

2U Rackmount

Documented selection limits

Configurable server platform: CPU, RAM, drives, GPUs, networking adapters and optional licenses are not asserted to be installed. All capacities are supported limits or configuration options, not delivered capacity. Agree the exact BOM separately. Multi-node counts and limits retain per-node versus shared-system scope. NVMe/SAS/SATA, risers, cooling and power redundancy may require specific optional hardware and workload validation. No stock or lifecycle guarantee.

Specification source: Supermicro ↗
Checked against documentation: 19.10.2026