TP-Link 300Mbps Wireless N Ceiling Mount Access Point · EAP115

Model code

EAP115

Manufacturer designation

300Mbps Wireless N Ceiling Mount Access Point

Source hardware version

V4.30

Interface

1 x 10M/100M Ethernet Port

Button

Reset

Power Supply

• 802.3af PoE; • 9V/0.6A DC

Max. Power Consumption

2.8 W

Dimensions ( W x D x H )

7.5 × 6.7 × 1.2 in (189.5 × 170.5 × 29.7mm)

Antenna

Internal 2× 4 dBi Omni

Mounting

Ceiling /Wall Mounting (Kits included)

Omada App

Yes

Centralized Management

• Omada Hardware Controller; • Omada Software Controller

Cloud Access

Yes. Require the use of an Omada on-premises controller.

LED ON/OFF Control

Yes

Management MAC Access Control

Yes

SNMP

v1, v2c, v3

System Logging Local/Remote Syslog

Local/Remote Syslog

SSH

Yes

Web-based Management

HTTP/HTTPS

L3 Management

Yes

Multi-site Management

Yes

Management VLAN

Yes

Coverage

650 ft² (60 ㎡) *

Concurrent Clients

100 **

Wireless Standards

2.4 GHz: IEEE 802.11b/g/n

Frequency

2.400 to 2.4835 GHz ISM

Signal Rate

6.5 Mbps to 300 Mbps

Wireless Functions

• Multiple SSIDs （Up to 8 SSIDs）; • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control （Adjust Transmit Power on dBm）; • QoS(WMM); • Seamless Roaming(802.11r); • Rate Limit; • Reboot Schedule; • Wireless Schedule; • Wireless Statistics based on SSID/AP/Client

Wireless Security

• Captive Portal Authentication; • Access Control; • Wireless MAC Address Filtering; • Wireless Isolation Between Clients; • SSID to VLAN Mapping; • Rogue AP Detection; • 802.1X Support; • 64/128/152-bit WEP / WPA / WPA2-Enterprise,WPA-PSK / WPA2-PSK

Transmission Power

• CE:; 10-19 dBm (2.4GHz, EIRP); • FCC:; 6-21 dBm (2.4GHz)

Environment

• Operating Temperature: 0 ℃–40 ℃ (32 ℉–104 ℉); • Storage Temperature: -40 ℃–70 ℃ (-40 ℉–158 ℉); • Operating Humidity: 10%–90% RH non-condensing; • Storage Humidity: 5%–90% RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. * Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors. ** The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections. △ These features require the use of an Omada on-premises controller.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026