TP-Link AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point · EAP223

Model code

EAP223

Manufacturer designation

AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point

Source hardware version

V2.20

Interface

1× Gigabit Ethernet Port

Physical Security Lock

Yes

Button

Reset

Power Supply

• 802.3af PoE; • 24V Passive PoE (+4,5pins; -7,8pins. PoE Adapter Included)

Max. Power Consumption

EU: 10.5 W; US: 12.6 W

Dimensions ( W x D x H )

8.1 × 7.1 × 1.5 in (205.5 × 181.5 × 37.1 mm)

Antenna

3× Internal Omni; • 2.4 GHz: 3× 4 dBi; • 5 GHz: 2× 5 dBi

Mounting

Ceiling /Wall Mounting (Kits included)

Omada App

Yes

Centralized Management

• Omada Central (Cloud-Based); • Omada Hardware Controller; • Omada Software Controller

Cloud Access

Yes. Require the use of an Omada controller.

Email Alerts

Yes

LED ON/OFF Control

Yes

Management MAC Access Control

Yes

SNMP

v1,v2c

System Logging Local/Remote Syslog

Local/Remote Syslog

SSH

Yes

Web-based Management

HTTP/HTTPS

L3 Management

Yes

Multi-site Management

Yes

Management VLAN

Yes

Zero-Touch Provisioning

Yes

Wireless Standards

IEEE 802.11ac/n/g/b/a

Frequency

2.4 GHz and 5 GHz

Signal Rate

• 5 GHz:Up to 867 Mbps; • 2.4 GHz:Up to 450 Mbps

Wireless Functions

• Multiple SSIDs (Up to 16 SSIDs, 8 for each band); • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS(WMM); • Seamless Roaming*; • Omada Mesh*; • Band Steering; • Load Balance; • MU-MIMO; • Airtime Fairness; • Beamforming; • Rate Limit; • Reboot Schedule; • Wireless Schedule; • Wireless Statistics based on SSID/AP/Client

Wireless Security

• Captive Portal Authentication*; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • SSID to VLAN Mapping; • Rogue AP Detection; • 802.1X Support

Transmission Power

• CE:; 10-20 dBm(2.4 GHz, EIRP); 9-23 dBm(5 GHz, U-NII-1 & U-NII-2A, EIRP); 9-27 dBm(5 GHz, U-NII-2C, EIRP); ; • FCC:; 6-24 dBm(2.4 GHz); 4-22 dBm(5 GHz, U-NII-1 & U-NII-3)

Environment

• Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. ‡ MU-MIMO capability requires client devices that also support MU-MIMO. *Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors. **The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections. △These features require the use of an Omada controller

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026