TP-Link AC1200 Wireless MU-MIMO Gigabit Indoor/Outdoor Access Point · EAP225-Outdoor

Model code

EAP225-Outdoor

Manufacturer designation

AC1200 Wireless MU-MIMO Gigabit Indoor/Outdoor Access Point

Source hardware version

V3.20

Interface

1× Gigabit Ethernet (RJ-45) Port (Support 802.3af/at PoE (Alternative A) and Passive PoE)

Button

Reset

Power Supply

• 802.3af PoE; • 24V Passive PoE (+4,5pins; -7,8pins. PoE Adapter Included - For Dry Indoor Use Only)

Max. Power Consumption

10.5W

Dimensions ( W x D x H )

1.8 × 1.1 × 8.5 in (46 × 26.7 × 214.9 mm); (without antenna & mounting kit)

Antenna

2 Dual-Band Omni Antennas (External Detachable); • 2.4 GHz: 2× 3 dBi; • 5 GHz: 2× 5 dBi

Weatherproof Enclosure

IP65

Mounting

Pole/Wall Mounting (Kits included)

Omada App

Yes

Centralized Management

• Omada Cloud-Based Controller; • Omada Hardware Controller; • Omada Software Controller

Cloud Access

Yes. Require the use of an Omada controller.

Email Alerts

Yes

Management MAC Access Control

Yes

SNMP

v1, v2c, v3

System Logging Local/Remote Syslog

Yes

SSH

Yes

Web-based Management

Yes

L3 Management

Yes

Multi-site Management

Yes

Management VLAN

Yes

Zero-Touch Provisioning

Yes. Requiring the use of Omada Cloud-Based Controller.

Wireless Standards

IEEE 802.11a/b/g/n/ac

Frequency

2.4GHz, 5GHz

Signal Rate

• 802.11ac: 6.5 Mbps to 867 Mbps(MCS0-MCS9,NSS = 1 to 2 VHT20/40/80) ; • 802.11n: 6.5 Mbps to 300 Mbps (MCS0-MCS15, HT 20/40); • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps; • 802.11b: 1, 2, 5.5, 11Mbps; • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Wireless Functions

• Multiple SSIDs（Up to 16 SSIDs, 8 for each band）; • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control （Adjust Transmit Power on dBm）; • QoS(WMM); • MU-MIMO; • Seamless Roaming(802.11k/v/r)*; • Omada Mesh*; • Airtime Fairness; • Beamforming; • Band Steering; • Load Balance; • Rate Limit; • Reboot Schedule; • Wireless Schedule; • Wireless Statistics based on SSID/AP/Client

Wireless Security

• Captive Portal Authentication*; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • SSID to VLAN Mapping; • Rogue AP Detection; • 802.1X Support

Transmission Power

• CE: <20 dBm (2.4 GHz, EIRP), <27 dBm(5 GHz, EIRP); • FCC: <23 dBm (2.4 GHz), <22 dBm(5 GHz)

System Requirements

Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux

Environment

• Operating Temperature: -30–70 ℃ (-22–158 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition. § The advertised coverage is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of the performance of the equipped antennas, client limitations, and environmental factors. △ Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product. *Omada Mesh, Seamless Roaming, and Captive Portal require the use of Omada SDN controllers. Please go to Omada Mesh Product List to find all the models supported by Omada mesh technology, and refer to the User Guides of Omada SDN controllers for configuration methods.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026