TP-Link AX1800 Wall Plate WiFi 6 Access Point · EAP615-Wall

Model code

EAP615-Wall

Manufacturer designation

AX1800 Wall Plate WiFi 6 Access Point

Source hardware version

V1.20

Interface

• Uplink: 1× Gigabit Ethernet Port; • Downlink: 3× Gigabit Ethernet Ports (One port supports PoE pass-through.)

Physical Security Lock

Yes

Button

Reset

Power Supply

802.3af/at PoE

PoE Out

Passthrough (Pins 1,2+; 3,6-); The PoE pass-through feature requires 802.3at PoE input.The maximum power output for POE pass-through is 13 W (EU version) or 12 W (US version), based on laboratory testing.

Max. Power Consumption

• EU: 10W (802.3at PoE, PoE Out off) ; • US: 11.5W (802.3at PoE, PoE Out off)

Dimensions ( W x D x H )

5.6 × 3.4 × 0.8 in (143 × 86 × 19.7 mm)

Antenna

Dual-Band Antennas:; • 2.4 GHz: 2× 3 dBi; • 5 GHz: 2× 4 dBi

Mounting

Wall Plate Mounting

Omada App

Yes

Centralized Management

• Omada Hardware Controller; • Omada Software Controller; • Omada Cloud-Based Controller

Cloud Access

Yes. Require the use of an Omada controller.

Email Alerts

Yes

LED ON/OFF Control

Yes

Management MAC Access Control

Yes

SNMP

v1, v2c, v3

System Logging Local/Remote Syslog

Local/Remote Syslog

SSH

Yes

Web-based Management

HTTP/HTTPS

L3 Management

Yes

Multi-site Management

Yes

Management VLAN

Yes

Zero-Touch Provisioning

Yes. Requiring the use of Omada Cloud-Based Controller.

Coverage

600 ft² (50㎡) *

Concurrent Clients

120+ **

Wireless Standards

IEEE 802.11ax/ac/n/g/b/a

Frequency

2.4 GHz and 5 GHz

Signal Rate

• 5 GHz: Up to 1201 Mbps; • 2.4 GHz: Up to 574 Mbps

Wireless Functions

• 16 SSIDs (Up to 8 SSIDs on each band); • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS(WMM); • Omada Mesh △ ; • Seamless Roaming(802.11k/v/r) △ ; • Beamforming; • MU-MIMO; • Rate Limit; • Load Balance; • Airtime Fairness; • Band Steering; • Reboot Schedule; • Wireless Schedule; • RADIUS Accounting; • MAC Authentication; • Wireless Statistics; • Static IP/Dynamic IP

Wireless Security

• Captive Portal Authentication △ ; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • VLAN; • Rogue AP Detection; • 802.1X Support; • WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise

Transmission Power

• CE:; 7-24 dBm (2.4 GHz, EIRP); 7-24 dBm (5 GHz, U-NII-1, U-NII-2A, EIRP); 7-24 dBm(5 GHz, U-NII-2C, EIRP); ; • FCC:; 4-21 dBm (2.4 GHz); 4-21 dBm (5 GHz, U-NII-1, U-NII-2A, U-NII-2C, U-NII-3)

System Requirements

Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows 10, Windows 11, Linux

Environment

• Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing

Manufacturer page pack selector

1-pack; model identifier only, not a separately verified full pack-order SKU

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. ‡ Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, and 1024-QAM requires clients to also support the corresponding features. * Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors. ** The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections. △ These features require the use of an Omada controller.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026