TP-Link AX1800 Ceiling Mount WiFi 6 Access Point · EAP620 HD

Model code

EAP620 HD

Manufacturer designation

AX1800 Ceiling Mount WiFi 6 Access Point

Source hardware version

V3.30

Interface

1× Gigabit Ethernet Port

Button

Reset

Power Supply

• 802.3at PoE; • 48 V Passive PoE; • 12 V/1.5 A DC

Max. Power Consumption

• EU: 14.4 W (For PoE); 13.1 W (For DC); • US: 14.9 W (For PoE); 13.4 W (For DC)

Dimensions ( W x D x H )

6.3 × 6.3 × 1.3 in (160 × 160 × 33.6 mm)

Antenna

• 2.4 GHz: 2× 4 dBi; • 5 GHz: 2× 5 dBi

Mounting

Ceiling /Wall Mounting/Junction Box Mounting (Kits included)

Omada App

Yes

Centralized Management

• Omada Central (Cloud-Based); • Omada Hardware Controller; • Omada Software Controller

Cloud Access

Yes. Require the use of Omada Controller.

Email Alerts

Yes

LED ON/OFF Control

Yes

Management MAC Access Control

Yes

SNMP

v1, v2c, v3

System Logging Local/Remote Syslog

Local/Remote Syslog

SSH

Yes

Web-based Management

HTTP/HTTPS

L3 Management

Yes

Multi-site Management

Yes

Management VLAN

Yes

Zero-Touch Provisioning

Yes. Require the use of Omada Controller. (Supported by EAP620 HD v2.0 and above)

Coverage

1500 ft²(140㎡) *

Concurrent Clients

1,020+ **

Wireless Standards

IEEE 802.11ax/ac/n/g/b/a

Frequency

2.4 GHz and 5 GHz

Signal Rate

574 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) †

Wireless Functions

• 1024-QAM; • 4× Longer OFDM Symbol; • OFDMA; • Multiple SSIDs (Up to 16 SSIDs, 8 for each band); • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS(WMM); • MU-MIMO ; • Seamless Roaming(802.11k/v/r) △ ; • Omada Mesh △ ; • Band Steering; • Load Balance; • Airtime Fairness ; • Beamforming; • Rate Limit; • Reboot Schedule; • Wireless Schedule; • Wireless Statistics based on SSID/AP/Client

Wireless Security

• Captive Portal Authentication △ ; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • SSID to VLAN Mapping; • Rogue AP Detection; • 802.1X Support; • WEP, WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise

Transmission Power

• CE:; 7-20 dBm(2.4 GHz, EIRP); 7-23 dBm(5 GHz, U-NII-1 & U-NII-2A, EIRP) ; 7-30 dBm (5 GHz, U-NII-2C, EIRP); ; • FCC:; 4-25 dBm (2.4 GHz); 4-25 dBm (5 GHz, U-NII-1, U-NII-3)

Environment

• Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. ‡ Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, and 1024-QAM requires clients to also support the corresponding features. * Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors. ** The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections. △ Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada controller

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026