TP-Link Directional AX3000 Indoor/Outdoor WiFi 6 Access Point · EAP650 D30-Outdoor

Model code

EAP650 D30-Outdoor

Manufacturer designation

Directional AX3000 Indoor/Outdoor WiFi 6 Access Point

Source hardware version

V1.20

Interface

1× Gigabit Ethernet Port (supports 802.3at PoE or 48V Passive PoE)

Button

Reset

Power Supply

• 802.3at PoE; • 48V Passive PoE

Max. Power Consumption

• EU: 12.5W (802.3at PoE or Passive PoE); • US: 14.7W (802.3at PoE or Passive PoE)

Dimensions ( W x D x H )

8.2 × 2.3 × 9.1 in (207.5 × 58 × 230 mm)

Antenna

Built-in Directional Antennas: ; • 2.4 GHz: 2× 12 dBi; • 5 GHz: 2× 15 dBi; Beamwidth: 30° Horizontal; 30° Vertical

Bluetooth

Yes

Weatherproof Enclosure

IP68

Mounting

Wall/Pole/Ceiling Mount

Omada App

Yes

Restore & Backup

Yes

NTP

Yes

Centralized Management

• Omada Cloud-Based Controller; • Omada Hardware Controller; • Omada Software Controller; • Omada App

Cloud Access

Yes. Require the use of an Omada controller.

Email Alerts

Yes

LED ON/OFF Control

Yes

Management MAC Access Control

Yes

SNMP

v1, v2c, v3

System Logging Local/Remote Syslog

Yes

SSH

Yes

Web-based Management

Yes

Multi-site Management

Yes

Zero-Touch Provisioning

Yes. Requiring the use of Omada Cloud-Based Controller

Concurrent Clients

250+ **

Wireless Standards

IEEE 802.11 a/b/g/n/ac/ax

Frequency

2.4 GHz, 5 GHz

Signal Rate

574 Mbps (2.4 GHz) + 2402 Mbps (5 GHz)†

Wireless Functions

• 1024-QAM; • DL/UL OFDMA; • Multiple SSIDs (Up to 16 SSIDs, 8 on each band); • Enable/Disable Wireless Radio; • Enable/Disable SSID Broadcast; • Guest Network; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS (WMM); • 2 × 2 (2.4 GHz & 5 GHz) DL/UL MU-MIMO; • Omada Mesh § ; • Seamless Roaming(802.11k/v/r) § ; • Band Steering; • Load Balance; • Airtime Fairness; • Beamforming; • RADIUS Accounting; • MAC Authentication; • Reboot Schedule; • Wireless Schedule; • Wireless Statistics; • Static IP/Dynamic IP

Wireless Security

• Captive Portal Authentication § ; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • SSID to VLAN Mapping; • Rogue AP Detection; • 802.1X Support; • WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise

Transmission Power

• EU: < 20 dBm (2.4GHz, EIRP); < 23dBm (5 GHz, band1 & band 2, EIRP);< 30 dBm (5 GHz,band 3, EIRP);; • US: < 30 dBm (2.4 GHz); < 30 dBm (5 GHz)

System Requirements

Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux

Environment

• Operating Temperature: -30–70 ℃ (-22–158 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

† Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range, coverage, and maximum quantity of connected devices are based on test results under normal usage conditions. Actual wireless data throughput, wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection quality, and client condition. § Omada Mesh, Seamless Roaming, Cloud Access, and Captive Portal require the use of an Omada controller. * Coverage is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors. ** The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026