TP-Link AX3000 Indoor/Outdoor Wi-Fi 6 Access Point · EAP650-Outdoor

Model code

EAP650-Outdoor

Manufacturer designation

AX3000 Indoor/Outdoor Wi-Fi 6 Access Point

Source hardware version

V1.20

Interface

1× Gigabit Ethernet (RJ-45) Port (Support 802.3at PoE and Passive PoE)

Button

Reset

Power Supply

• 802.3at PoE; • 48V Passive PoE (PoE Adapter Included - For Dry Indoor Use Only)

Max. Power Consumption

• EU: 12.5W (802.3at PoE or Passive PoE); • US: 14.7W (802.3at PoE or Passive PoE)

Dimensions ( W x D x H )

4.2 × 2.2 × 11.1 in (106.5 × 57 × 281 mm); (without antenna & mounting kit)

Antenna

• 2.4 GHz: 2× 4 dBi; • 5 GHz: 2× 5 dBi

Weatherproof Enclosure

IP68

Mounting

Pole/Wall Mounting (Kits included)

Omada App

Yes

Centralized Management

• Omada Cloud-Based Controller; • Omada Hardware Controller; • Omada Software Controller

Cloud Access

Yes. Require the use of an Omada controller.

Email Alerts

Yes

Management MAC Access Control

Yes

SNMP

v1, v2c

System Logging Local/Remote Syslog

Yes

SSH

Yes

Web-based Management

Yes

L3 Management

Yes

Multi-site Management

Yes

Management VLAN

Yes

Zero-Touch Provisioning

Yes. Requiring the use of Omada Cloud-Based Controller

Concurrent Clients

250+ 6

Wireless Standards

IEEE 802.11ax/ac/n/g/b/a

Frequency

2.4 GHz, 5 GHz

Signal Rate

• 802.11ax: 8 Mbps to 2402 Mbps (MCS0-MCS11, NSS = 1 to 2 HE20/40/80/160); • 802.11ac: 6.5 Mbps to 1083.3 Mbps (MCS0-MCS9, NSS = 1 to; 2 VHT20/40/80); • 802.11n: 6.5 Mbps to 300 Mbps (MCS0-MCS15, HT20/40); • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps; • 802.11b: 1, 2, 5.5, 11 Mbps; • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Wireless Functions

• 1024-QAM; • 4× Longer OFDM Symbol; • OFDMA; • Multiple SSIDs (Up to 16 SSIDs, 8 for each band); • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS (WMM); • MU-MIMO; • Omada Mesh 3 ; • Seamless Roaming(802.11k/v/r) 3 ; • Band Steering; • Load Balance; • Airtime Fairness; • Beamforming; • Rate Limit; • Reboot Schedule; • Wireless Schedule; • Wireless Statistics based on SSID/AP/Client

Wireless Security

• Captive Portal Authentication 3 ; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • SSID to VLAN Mapping; • Rogue AP Detection; • 802.1X Support; • WEP, WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise

Transmission Power

• CE: <20 dBm (2.4 GHz, EIRP), <30 dBm(5 GHz, EIRP); • FCC: <25 dBm (2.4 GHz), <25 dBm(5 GHz)

System Requirements

Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux

Environment

• Operating Temperature: -30–70 ℃ (-22–158 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

1. Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range, coverage, and maximum quantity of connected devices are based on test results under normal usage conditions. Actual wireless data throughput, wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection quality, and client condition. 2. Use of WiFi 6 (802.11ax) and its features, including OFDMA, HE160, and 1024-QAM, requires clients to support the corresponding features. The 160 MHz bandwidth is only available on the 5 GHz band and may be unavailable in some regions/countries due to regulatory restrictions. The double channel width refers to 160 MHz compared to 80 MHz for general WiFi 6 APs. 3. Omada Mesh, Seamless Roaming, Cloud Access, and Captive Portal require the use of Omada SDN controllers. Go to Omada Mesh Product List to find all the models supported by Omada mesh technology and refer to the User Guides of Omada SDN controllers for configuration methods. 4. Based on field tests. The number listed here is the maximum distance one EAP650-Outdoor can reach and connect the devices. The real transmission range and recommended coverage may vary, according to the environment, receiving device, etc. 5. Zero-Touch Provisioning requires the use of the Omada Cloud-Based Controller. Note that EAP650-Outdoor v1.0 doesn't support the Omada Cloud-Based Controller. Please go to www.tp-link.com/omada-cloud-based-controller/product-list to confirm which models are compatible with the Omada Cloud-Based Controller. 6. The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026