TP-Link / Omada

TP-Link AX3000 Wall Plate WiFi 6 Access Point · EAP650-Wall

Model code: EAP650-Wall

Access point

Networking device; verify hardware revision, region and power before ordering. Interface: • Uplink: 1× Gigabit Ethernet Port; • Downlink: 1× Gigabit Ethernet Port · Power Supply: 802.3af PoE · Wireless Standards: IEEE 802.11ax/ac/n/g/b/a

Enquire ↗+998 77 161 11 11 ↗ +998 97 741 55 00 ↗
TP-Link AX3000 Wall Plate WiFi 6 Access Point · EAP650-Wall — Specification schematic, not a product photograph or installation drawing.
Specification schematic, not a product photograph or installation drawing. Citadex Systems · Specification source
01 / Specifications
Model code
EAP650-Wall
Manufacturer designation
AX3000 Wall Plate WiFi 6 Access Point
Source hardware version
V2.20
Interface
• Uplink: 1× Gigabit Ethernet Port; • Downlink: 1× Gigabit Ethernet Port
Physical Security Lock
No
Button
Reset, LED
Power Supply
802.3af PoE
Max. Power Consumption
EU: 10.5 W
Dimensions ( W x D x H )
3.4 × 3.4 × 1.7 in (86 × 86 × 42.2 mm)
Antenna
2 Dual-Band Antennas; • 2.4 GHz: 2× 3 dBi; • 5 GHz: 3× 5 dBi
Mounting
Wall Mounting (Screws included)
Omada App
Yes
Centralized Management
• Omada Hardware Controller; • Omada Software Controller; • Omada Cloud-Based Controller
Cloud Access
Yes. Require the use of an Omada controller.
Email Alerts
Yes
LED ON/OFF Control
Yes
Management MAC Access Control
Yes
SNMP
v1, v2c, v3
System Logging Local/Remote Syslog
Local/Remote Syslog
SSH
Yes
Web-based Management
HTTP/HTTPS
L3 Management
Yes
Multi-site Management
Yes
Management VLAN
Yes
Zero-Touch Provisioning
Yes. Requiring the use of Omada Cloud-Based Controller.
Coverage
450ft² (40㎡) ***
Concurrent Clients
250+ **
Wireless Standards
IEEE 802.11ax/ac/n/g/b/a
Frequency
2.4 GHz and 5 GHz
Signal Rate
• 5 GHz: Up to 2402 Mbps; • 2.4 GHz: Up to 574 Mbps
Wireless Functions
• 16 SSIDs (Up to 8 SSIDs on each band); • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS(WMM); • Omada Mesh § ; • Seamless Roaming(802.11k/v/r) § ; • Beamforming; • Rate Limit; • Load Balance; • Airtime Fairness; • Band Steering; • Reboot Schedule; • Wireless Schedule; • RADIUS Accounting; • MAC Authentication; • Wireless Statistics; • Static IP/Dynamic IP
Wireless Security
• Captive Portal Authentication § ; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • VLAN; • Rogue AP Detection; • 802.1X Support; • WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Transmission Power
• CE: ; <20 dBm (2.4GHz, EIRP); <23 dBm (5GHz, EIRP )
System Requirements
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows 11, Linux
Environment
• Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing
Selection limits
Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.
Manufacturer operating-mode notes
† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed. They will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead; and 3) client limitations, including rated performance, location, connection, quality, and client condition. ‡ Use of WiFi 6 (802.11ax) and its features, including OFDMA and 1024-QAM, require clients to support the corresponding features. § Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada SDN controller. Please refer to the User Guides of Omada SDN controllers for configuration methods. * Zero-Touch Provisioning and Auto Channel Selection and Power Adjustment require the use of Omada Cloud-Based Controller. Go to https://www.tp-link.com/en/omada-cloud-based-controller/product-list/ to confirm which models are compatible with Omada Cloud-Based Controller. ** The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections. *** Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.
Identifier scope
Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026

Reference catalogue for quotation requests. Availability, production status, condition, price, lead time and warranty are individually confirmed. A listed part number is not a stock claim.