TP-Link / Omada

TP-Link AX3600 Wireless Dual Band Multi-Gigabit Ceiling Mount Access Point · EAP660 HD

Model code: EAP660 HD

Access point

Networking device; verify hardware revision, region and power before ordering. Interface: 1× 2.5 Gigabit RJ45 Port · Power Supply: • 802.3at PoE; • 12 V/2 A DC · Wireless Standards: IEEE 802.11ax/ac/n/g/b/a

Enquire ↗+998 77 161 11 11 ↗ +998 97 741 55 00 ↗
TP-Link AX3600 Wireless Dual Band Multi-Gigabit Ceiling Mount Access Point · EAP660 HD — Specification schematic, not a product photograph or installation drawing.
Specification schematic, not a product photograph or installation drawing. Citadex Systems · Specification source
01 / Specifications
Model code
EAP660 HD
Manufacturer designation
AX3600 Wireless Dual Band Multi-Gigabit Ceiling Mount Access Point
Source hardware version
V2.20
Interface
1× 2.5 Gigabit RJ45 Port
Button
Reset
Power Supply
• 802.3at PoE; • 12 V/2 A DC
Max. Power Consumption
• EU: 21.5 W; • US: 22.5 W
Dimensions ( W x D x H )
8.7 × 8.7 × 1.3 in (220 × 220 × 32.5 mm)
Antenna
Internal Omni; • 2.4 GHz: 4× 6 dBi; • 5 GHz: 4× 6.5 dBi
Bluetooth
V5.2
Mounting
Ceiling /Wall/Junction Box/T-Bar Mounting (Kits Included)
Omada App
Yes
Centralized Management
• Omada Cloud-Based Controller; • Omada Hardware Controller; • Omada Software Controller
Cloud Access
Yes. Require the use of an Omada controller.
Email Alerts
Yes
LED ON/OFF Control
Yes
Management MAC Access Control
Yes
SNMP
v1, v2c, v3
System Logging Local/Remote Syslog
Local/Remote Syslog
SSH
Yes
Web-based Management
HTTP/HTTPS
L3 Management
Yes
Multi-site Management
Yes
Management VLAN
Yes
Zero-Touch Provisioning
Yes. Require the use of an Omada controller.
Coverage
2150ft²(200㎡) *
Concurrent Clients
1,020+ **
Wireless Standards
IEEE 802.11ax/ac/n/g/b/a
Frequency
2.4 GHz and 5 GHz
Signal Rate
• 5 GHz: Up to 2402 Mbps; • 2.4 GHz: Up to 1148 Mbps
Wireless Functions
• 1024-QAM; • 4× Longer OFDM Symbol; • OFDMA; • Multiple SSIDs (Up to 16 SSIDs, 8 for each band); • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS(WMM); • MU-MIMO (2G: 4x4 DL MU-MIMO; 5G: 4x4 DL MU-MIMO); • Seamless Roaming(802.11k/v/r) △ ; • Omada Mesh △ ; • Band Steering; • Load Balance; • Airtime Fairness ; • Beamforming; • Rate Limit; • Reboot Schedule; • Wireless Schedule; • Wireless Statistics based on SSID/AP/Client
Wireless Security
• Captive Portal Authentication △ ; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • SSID to VLAN Mapping; • Rogue AP Detection; • 802.1X Support; • WEP, WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Transmission Power
• CE:; <20 dBm(2.4 GHz, EIRP); <23 dBm(5 GHz, U-NII-1 & U-NII-2A,EIRP); <30 dBm(5 GHz, U-NII-2C,EIRP); ; • FCC:; <22 dBm (2.4 GHz); <22 dBm (5 GHz, U-NII-1 & U-NII-3)
Environment
• Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing
Selection limits
Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.
Manufacturer operating-mode notes
† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. ‡ Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, and 1024-QAM requires clients to also support the corresponding features. * Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors. ** The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections. △ Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada controller.
Identifier scope
Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026

Reference catalogue for quotation requests. Availability, production status, condition, price, lead time and warranty are individually confirmed. A listed part number is not a stock claim.