TP-Link BE5000 Wall Plate Wi-Fi 7 Access Point · EAP725-Wall

Model code

EAP725-Wall

Manufacturer designation

BE5000 Wall Plate Wi-Fi 7 Access Point

Source hardware version

(US) V2

Interface

• Uplink: 1× 2.5G Ethernet Port; • Downlink: 1× 2.5G Ethernet Port + 3× Gigabit Ethernet Ports; (Two Gigabit ports offer flexible PoE Out, providing either dual PoE or single PoE+ output.The PoE Out feature requires 802.3bt input.) #

Physical Security Lock

Yes

Button

Reset

Power Supply

802.3at/bt PoE

PoE Out

With 802.3bt Input:; • Supports dual PoE or single PoE+ output, with a 30W total power budget.; ; With 802.3at Input:; • Supports dual PoE output, with a 7W total power budget.; • Limitation: If both ports are connected, one port will shut down automatically if either exceeds 3.5W.

Max. Power Consumption

46.8W with 30W PoE Out (Requires 802.3bt PoE++ Input)

Dimensions ( W x D x H )

6.6 × 3.4 × 1.1 in (167.8 × 86 × 28 mm)

Antenna

• 2.4 GHz: 2× 3 dBi; • 5 GHz: 2× 5 dBi; • Bluetooth: 1 × 1 dBi; (Note: The gains above are the single-antenna peak gains)

Bluetooth

V5.2

Mounting

Junction Box / Wall Mounting (Kits included)

Omada App

Yes ( V4.24 and above)

Centralized Management

• Omada Cloud-Based Controller; • Omada Hardware Controller; • Omada Software Controller

Cloud Access

Yes. Require the use of an Omada controller.

Email Alerts

Yes

LED ON/OFF Control

Yes

Management MAC Access Control

Yes

SNMP

v1, v2c, v3

System Logging Local/Remote Syslog

System Log

SSH

Yes

Web-based Management

Yes

L3 Management

Yes

Multi-site Management

Yes

Management VLAN

Yes

Zero-Touch Provisioning

Yes. Require the use of an Omada Controller.

Coverage

970 ft² (90 ㎡)**

Concurrent Clients

250+*

Wireless Standards

IEEE 802.11 a/b/g/n/ac/ax/be

Frequency

2.4 GHz and 5 GHz

Signal Rate

• 5 GHz: Up to 4323 Mbps † ; • 2.4 GHz: Up to 688 Mbps †

Wireless Functions

• MLO ‡ ; • 4K-QAM ‡ ; • Multi-RUs ‡ ; • 240 MHz Bandwidth ‡ ; • 16 SSIDs (Up to 8 SSIDs on each band); • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS(WMM); • Seamless Roaming § ; • Beamforming; • Rate Limit (Based on SSID/Client); • Load Balance; • Airtime Fairness; • Band Steering; • Reboot Schedule; • Wireless Schedule; • RADIUS Accounting; • MAC Authentication; • Wireless Statistics; • Static IP/Dynamic IP

Wireless Security

• Captive Portal Authentication § ; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • VLAN; • Rogue AP Detection; • WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise

Transmission Power

4-23 dBm (2.4GHz); 4-24 dBm (5GHz, U-NII-1, U-NII-2A, U-NII-2C, U-NII-3/ISM)

System Requirements

Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows 11, Linux

Environment

• Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -30–70 ℃ (-22–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing; • Operating &Storage Altitude: up to + 2000 m (6561 feet)

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 240 MHz bandwidth and 160 MHz are only available on the 5 GHz band and may be unavailable in some regions/countries due to regulatory restrictions. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.; ‡ Use of Wi-Fi 7 (802.11be) features including Multi-Link Operation (MLO), 4K-QAM, Multi-RUs, OFDMA, and MU-MIMO requires clients to also support the corresponding features.; # Dual PoE output with a 7W total budget via 802.3at input (switches to single-port output if either port exceeds 3W), or dual PoE/single PoE+ output via 802.3bt input.; § These features require the use of an Omada controller.; *Actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.; **Coverage is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026