TP-Link Omada Tri-Band Omnidirectional BE11000 Indoor/Outdoor WiFi 7 Access Point · EAP772-Outdoor

Model code

EAP772-Outdoor

Manufacturer designation

Omada Tri-Band Omnidirectional BE11000 Indoor/Outdoor WiFi 7 Access Point

Source hardware version

(US) V1

Interface

1× 2.5G Ethernet (RJ-45) Port (Support 802.3at PoE)

Button

Reset

Power Supply

• 802.3at PoE

Max. Power Consumption

21.5W (for PoE)

Dimensions ( W x D x H )

9.1× 8.2 × 2.8 in (230 × 207.5 × 69.7 mm)

Antenna

• 2.4 GHz: 2× 4 dBi; • 5 GHz: 2× 6 dBi; • 6 GHz: 2× 6 dBi

GNSS

L1 (1575.42 MHz) receiver, supporting GPS, Galileo, GLONASS, and BeiDou signals; Receive sensitivity: -164dBm (tracking); GPS antennas: Integrated 3dBi omnidirectional antennas

Bluetooth

BLE 5.2

Weatherproof Enclosure

IP68

Mounting

Pole/Wall Mounting (Kits included)

Omada App

Yes

Centralized Management

• Omada Cloud-Based Controller; • Omada Hardware Controller; • Omada Software Controller

Cloud Access

Yes. Require the use of an Omada controller.

Email Alerts

Yes

Management MAC Access Control

Yes

SNMP

v1, v2c

System Logging Local/Remote Syslog

Yes

SSH

Yes

Web-based Management

Yes

L3 Management

Yes

Multi-site Management

Yes

Management VLAN

Yes

Zero-Touch Provisioning

Yes. Requiring the use of Omada Cloud-Based Controller

Coverage

300m 2 (3,200ft 2 ) Recommended Omnidirectional Coverage

Concurrent Clients

380+ **

Wireless Standards

IEEE 802.11be/ax/ac/n/g/b/a

Frequency

2.4 GHz, 5 GHz, 6 GHz

Signal Rate

688 Mbps (2.4 GHz) + 4324 Mbps (5 GHz) + 5765 Mbps (6 GHz) †

Wireless Functions

• 4k-QAM; • OFDMA; • Multiple SSIDs: 24 (8 for each band); • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS (WMM); • MU-MIMO; • MLO; • 320MHz; • Omada Mesh § ; • Seamless Roaming(802.11k/v/r) § ; • Band Steering; • Load Balance; • Airtime Fairness; • Beamforming; • Rate Limit; • Reboot Schedule; • Wireless Schedule; • Wireless Statistics based on SSID/AP/Client; • Static IP/Dynamic lP

Wireless Security

• Captive Portal Authentication § ; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • SSID to VLAN Mapping; • Rogue AP Detection; • 802.1X Support; • WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise, OWE

Transmission Power

• CE: ; Indoor Mode: < 20 dBm (2.4 GHz, EIRP);, < 23 dBm (5 GHz, band 1 & band 2, ElRP), < 28 dBm (5 GHz, band 3, EIRP); <23dBm (6 GHz, EIRP); Outdoor Mode: < 20 dBm (2.4 GHz, EIRP); < 28 dBm (5 GHz, band 3, EIRP); • FCC: ; Indoor Mode: < 25 dBm (2.4 GHz); < 25 dBm (5 GHz); < 25 dBm (6 GHz); Outdoor Mode:< 25 dBm (2.4 GHz); < 25 dBm (5 GHz); < 25 dBm (6 GHz)

System Requirements

Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux

Environment

• Operating Temperature: -30–70 ℃ (-22–158 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 320 MHz bandwidth is only available on the 6 GHz band. Simultaneously, the 320 MHz bandwidth on the 6 GHz band and 160 MHz bandwidth on the 5 GHz band may be unavailable in some regions/countries due to regulatory restrictions. Double channel width and speed refer to 320 MHz compared to 160 MHz for Wi-Fi 6 routers. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location . △ Learn more details about AFC technology and regions that support AFC, please visit: https://www.omadanetworks.com/support/faq/4373/ ‡ Use of WiFi 7 (802.11be), WiFi 6 (802.11ax), and features including Multi-Link Operation (MLO), 320 MHz Bandwidth, 4K-QAM, Multi-RUs, OFDMA, and MU-MIMO requires clients to also support the corresponding features. § Omada Mesh, Seamless Roaming, Cloud Access, and Captive Portal require the use of Omada controllers. Go to the Omada Mesh Product List to find all the models supported by Omada mesh technology and refer to the User Guides of Omada controllers for configuration methods. * Coverage is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors. ** The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026