TP-Link BE9300 Wall Plate Wi-Fi 7 Access Point · EAP775-Wall

Model code

EAP775-Wall

Manufacturer designation

BE9300 Wall Plate Wi-Fi 7 Access Point

Source hardware version

(EU) V1

Interface

• Uplink: 1× 2.5G Ethernet Port; • Downlink: 1× 2.5G Ethernet Port + 3× Gigabit Ethernet Ports; (Two Gigabit ports offer flexible PoE Out, providing either dual PoE or single PoE+ output.The PoE Out feature requires 802.3bt input.)

Physical Security Lock

Yes

Button

Reset

Power Supply

802.3at/bt PoE

PoE Out

Two Gigabit ports offer flexible PoE Out, providing either dual PoE or single PoE+ output.; The PoE Out feature requires 802.3bt input.

Max. Power Consumption

43.35W（with 25W PoE Out)

Dimensions ( W x D x H )

6.8 × 3.6 × 1.6 in (172.9 × 91.2 × 41.3 mm)

Antenna

6× Internal Antennas; • 2.4 GHz: 2× 5 dBi; • 5 GHz: 2× 5.5 dBi; • 6 GHz: 2× 5.5 dBi

Bluetooth

V5.2

Mounting

Wall Mounting (Kits included)

Omada App

Yes

Centralized Management

• Omada Hardware Controller ; • Omada Software Controller; • Omada Cloud-Based Controller

Cloud Access

Yes. Requiring the use of an Omad Controller.

Email Alerts

Yes

LED ON/OFF Control

Yes

Management MAC Access Control

Yes

SNMP

v1, v2c, v3

System Logging Local/Remote Syslog

System Log

SSH

Yes

Web-based Management

Yes

L3 Management

Yes

Multi-site Management

Yes

Management VLAN

Yes

Zero-Touch Provisioning

Yes. Require the use of an Omada controller.

Coverage

1050 ft² (100 m²) *

Concurrent Clients

380+ **

Wireless Standards

IEEE 802.11 a/b/g/n/ac/ax/be

Frequency

2.4 GHz, 5 GHz, and 6 GHz

Signal Rate

• 6 GHz: Up to 5765 Mbps; • 5 GHz: Up to 2882 Mbps; • 2.4 GHz: Up to 688 Mbps

Wireless Functions

• MLO ‡ ; • 4K-QAM ‡ ; • Multi-RUs ‡ ; • 320 MHz Bandwidth ‡ ; • 24 SSIDs (Up to 8 SSIDs on each band); • Enable/Disable Wireless Radio; • Automatic Channel Assignment; • Transmit Power Control (Adjust Transmit Power on dBm); • QoS(WMM); • Seamless Roaming △ ; • Beamforming; • Rate Limit (Based on SSID/Client); • Load Balance; • Airtime Fairness; • Band Steering; • Reboot Schedule; • Wireless Schedule; • RADIUS Accounting; • MAC Authentication; • Wireless Statistics; • Static IP/Dynamic IP

Wireless Security

• Captive Portal Authentication △ ; • Access Control; • Wireless Mac Address Filtering; • Wireless Isolation Between Clients; • VLAN; • Rogue AP Detection; • WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise

Transmission Power

6-20 dBm (2.4 GHz, EIRP); 6-23 dBm (5 GHz, U-NII-1, U-NII-2A, EIRP); 6-27.5 dBm (5 GHz, U-NII-2C, EIRP); 6-23 dBm (6 GHz,EIRP)

System Requirements

Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows 11, Linux

Environment

• Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉); • Operating Humidity: 10–90% RH non-condensing; • Storage Humidity: 5–90% RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

† Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 320 MHz bandwidth is only available on the 6 GHz band. Simultaneously, the 320 MHz bandwidth on the 6 GHz band and 160 MHz bandwidth on the 5 GHz band may be unavailable in some regions/countries due to regulatory restrictions. Actual wireless data throughput and coverage are not guaranteed and will vary. § Painted covers cannot be returned or repaired. ‡ Use of Wi-Fi 7 (802.11be) and features including 320 MHz Bandwidth, 4K-QAM, Multi-RUs, OFDMA and MU-MIMO requires clients to also support the corresponding features. *Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors. **The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections. △ Omada mesh, seamless roaming, captive portal, and cloud access require the use of an Omada SDN controller. Please refer to the User Guides of Omada SDN controllers for configuration methods.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026