TP-Link 10/100Mbps WDM Media Converter with 1-Port PoE · FC111PB-20

Model code

FC111PB-20

Manufacturer designation

10/100Mbps WDM Media Converter with 1-Port PoE

Source hardware version

V2.20

Standards and Protocols

IEEE802.3, IEEE802.3i, IEEE802.3u

Interface

• 1× 10/100 Mbps PoE RJ45 port (Auto MDI/MDIX); • 1× 100 Mbps SC/UPC fiber port

Network Media

• 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (maximum 100 m); • Single-mode Fiber (9/125μm, maximum 20km)

Power Supply

48 V/0.5 A

LED

PWR, Link/Act, PoE

Wave Length

• 1310 nm TX; • 1550 nm RX

Dimensions ( W x D x H )

3.7×2.9×1.1 in (94.5×73.0×27.0 mm)

Operating Temperature

0–50 °C (32–122 °F)

Storage Temperature

-40–70 °C (-40–158 °F)

Operating Humidity

10–90% RH non-condensing

Storage Humidity

5–90% RH non-condensing

PoE output

IEEE 802.3af; downstream power output, not PoE input

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Match fiber mode, wavelength, connector and link partner; WDM units require the complementary transmitter/receiver. SFP/SFP+ modules and fibers are not included unless the exact product bundle explicitly says so. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026