TP-Link Omada 10/100 Mbps WDM Media Converter · MC112CSP-20

Model code

MC112CSP-20

Manufacturer designation

Omada 10/100 Mbps WDM Media Converter

Source hardware version

V2.20

Standards and Protocols

IEEE 802.3, IEEE 802.3i, IEEE802.3u, IEEE802.3af

Interface

• 1×100 Mbps SC/UPC Fiber Port; • 1× 10/100 Mbps PoE RJ45 Port (Auto MDI/MDIX)

Network Media

• Single-mode Fiber; • UTP category 5, 5e cable (maximum 100m)

Power Supply

External Power Adapter: 48 V/0.375 A

LED

PWR, Link/Act ,PoE

Wave Length

• 1310 nm TX; • 1550 nm RX

Dimensions ( W x D x H )

3.7×2.9×1.1 in (94.5×73.0×27.0 mm)

Fiber Type

9/125 μm single-mode fiber

Operating Temperature

-5˚C to 50˚C (23˚F to 122˚F)

Storage Temperature

-40˚C to 70˚C (-40˚F to 158˚F)

Operating Humidity

10% to 90% RH non-condensing

Storage Humidity

5% to 90% RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Match fiber mode, wavelength, connector and link partner; WDM units require the complementary transmitter/receiver. SFP/SFP+ modules and fibers are not included unless the exact product bundle explicitly says so. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026