TP-Link Omada Fast Ethernet PoE+ Extender · POE10E

Model code

POE10E

Manufacturer designation

Omada Fast Ethernet PoE+ Extender

Source hardware version

V1.30

Standards and Protocols

IEEE802.3i, IEEE802.3u

Interface

• 1× 10 Mbps /100 Mbps RJ45 PoE IN Port; • 1× 10 Mbps /100 Mbps RJ45 PoE OUT Port, up to 20 W

Network Media

UTP/STP of Cat.5E or above (based on the standards that the connected devices comply with)

Basic Function

• Complaince with 802.3af/at devices; • Up to 250 m data and power transmitting range under 10Mbps mode; • Plug and Play

Dimensions ( W x D x H )

2.8*1.02*0.63 in (71*26*16 mm)

Environment

• Operating Temperature: 0°C to 45°C (32°F to 113°F); • Storage Temperature: -40°C to 70°C (-40°F to 158°F); • Operating Humidity: 10% to 90%RH non-condensing; • Storage Humidity: 5% to 90%RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026