TP-Link PoE+ Injector · POE160S

Model code

POE160S

Manufacturer designation

PoE+ Injector

Source hardware version

V4

Standards and Protocols

IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3at

Interface

• 1× 10/100/1000Mbps RJ45 data-in port; • 1× 10/100/1000Mbps RJ45 power+data-out port; • 1 AC socket

Network Media

• 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100Ω STP (maximum 100 m); • 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100Ω STP (maximum 100 m); • 1000BASE-T: UTP category 5, 5e, 6 cable(maximum 100 m)

Max. Power Consumption

• Input: 100-240 V, 50/60 Hz; • Output: Auto-determine the necessary power requirements (max. 30 W)

Basic Function

• Auto-Sensing Algorithm enables providing power with 802.3af/at PD; • Auto-determine the necessary power requirements; • Wall-mounting and desktop installation supported; • Plug-and-Play

LED

Power / PoE

Dimensions ( W x D x H )

4.9×2.3×1.4 in (125×59.4×36.8 mm)

Environment

• Operating Temperature: 0°C to 40°C (32°F to 104°F); • Storage Temperature: -40°C to 70°C (-40°F to 158°F); • Operating Humidity: 10% to 90%RH non-condensing; • Storage Humidity: 5% to 90%RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026