TP-Link / Omada

TP-Link Omada PoE+ Extender · POE20E-Outdoor

Model code: POE20E-Outdoor

PoE extender

Networking device; verify hardware revision, region and power before ordering. Interface: • 1× 10/100/1000 Mbps Auto-Negotiation RJ45; • 1× 10/100/1000 Mbps Auto-Negotiation RJ45 · Source hardware version: V1 · Standards and Protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at

Enquire ↗+998 77 161 11 11 ↗ +998 97 741 55 00 ↗
TP-Link Omada PoE+ Extender · POE20E-Outdoor — Specification schematic, not a product photograph or installation drawing.
Specification schematic, not a product photograph or installation drawing. Citadex Systems · Specification source
01 / Specifications
Model code
POE20E-Outdoor
Manufacturer designation
Omada PoE+ Extender
Source hardware version
V1
Standards and Protocols
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
Interface
• 1× 10/100/1000 Mbps Auto-Negotiation RJ45; • 1× 10/100/1000 Mbps Auto-Negotiation RJ45
Network Media
•10BASE-T: 2-pair UTP/STP (≤250m) of Cat. 3 or above; •100BASE-TX: 2-pair UTP/STP (≤100m) of Cat. 5 or above; •1000BASE-T: 4-pair UTP/STP (≤100m) of Cat. 5e or above
Max. Power Consumption
Output: 30W
LED
2× Link/Act
Dimensions ( W x D x H )
221.7 × 31 × 31.5mm (8.73 × 1.22 × 1.24 in)
Weatherproof Enclosure
IP68
Lightning Protection
6kV
Environment
• Operating Temperature: -40°C to 65°C (-40°F to 149°F); • Storage Temperature: -40°C to 70°C (-40°F to 158°F); • Operating Humidity: 15% to 90% RH non-condensing; • Storage Humidity: 15% to 90% RH non-condensing
Selection limits
Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.
Manufacturer operating-mode notes
* POE20E-Outdoor features an adaptive data rate design. Link stability may be affected by cable length, cable quality, and the characteristics of the connected devices. Under certain conditions—such as using 160–170m Cat5e cables (tested in lab environments)—intermittent connectivity may occur. To resolve this issue(1) Manually conffgure the connected device to operate at 10 Mbps full-duplex or enable Extend Mode on the PSE, or (2) Adjust the cable length to avoid the affected range.
Identifier scope
Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026

Reference catalogue for quotation requests. Availability, production status, condition, price, lead time and warranty are individually confirmed. A listed part number is not a stock claim.