TP-Link Omada PoE++ Injector · POE370S

Model code

POE370S

Manufacturer designation

Omada PoE++ Injector

Source hardware version

V1

Standards and Protocols

IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3bz, IEEE 802.3an

Interface

2 × 10Mbps/100Mbps/1Gbps/2.5Gbps/5Gbps/10Gbps RJ45 Ports

Network Media

• 10Base-T/100Base-TX: UTP category 5 cable or above (maximum 100 m); • 1000Base-T/2.5GBase-T: UTP category 5e cable or above (maximum 100 m); • 5GBase-T: UTP category 5e cable or above (maximum 100 m); • 10GBase-T: UTP category 6 cable or above (maximum 50 m); STP category 6a cable or above (maximum 90 m)

Max. Power Consumption

60 W

LED

PWR, PoE

Dimensions ( W x D x H )

154.7 × 70 × 42 mm (6.09 × 2.76 × 1.65 in)

Environment

• Operating Temperature: -5°C to 45°C (23°F to 113°F); • Storage Temperature: -40°C to 70°C (-40°F to 158°F); • Operating Humidity: 10% to 90%RH non-condensing; • Storage Humidity: 5% to 90%RH non-condensing

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Manufacturer operating-mode notes

*POE370S is incompatible with Passive PoE and other non-standard PoE devices. The standards refer to IEEE 802.3af/at/bt.

Identifier scope

Documented model code. Regional ordering suffix and bundle are not invented and are confirmed separately.

Specification source: TP-Link ↗
Checked against documentation: 16.10.2026