Juniper QSFP-100G-SR4-C · 740-061405

MPN / P/N

740-061405

Ishlab chiqaruvchi modeli

QSFP-100G-SR4-C

Zavod raqami

740-061405

Liniya tezligi — hujjat bo‘yicha

4 x 25 Gigabit Ethernet, 100 Gigabit Ethernet

Breakout — platforma cheklovlari bilan

Yes

Format

QSFP28

Mahsulot turi

Optical Transceiver

Ulagich

MPO-12 PC/UPC

Monitoring mavjudligi

Yes

Raqamli optik monitoring

Yes

IEEE 802.3-2018 / Kabel / tola turi

MMF

IEEE 802.3-2018 / Yadro / qoplama o‘lchami

50/125 µm

IEEE 802.3-2018 / Diagnostic support

Yes

IEEE 802.3-2018 / Masofa / uzunlik — profil shartlari bilan

70 m | 100 m

IEEE 802.3-2018 / Effective modal bandwidth

2000 MHz x km | 4700 MHz x km

IEEE 802.3-2018 / Tola sinfi

OM3 | OM4

IEEE 802.3-2018 / Maksimal quvvat sarfi

3.5 W

IEEE 802.3-2018 / Ishlash harorati oralig‘i

0° C to 70° C

IEEE 802.3-2018 / Qabul kanali to‘lqin uzunligi oralig‘i

840 nm through 860 nm

IEEE 802.3-2018 / Har kanal maksimal kirish quvvati

2.4 dBm

IEEE 802.3-2018 / Har kanal minimal kirish quvvati

–10.3 dBm

IEEE 802.3-2018 / Har bir kanal signal tezligi

25.78125 GBd +/- 100 ppm

IEEE 802.3-2018 / Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4)

IEEE 802.3ba-2010

IEEE 802.3-2018 / Saqlash harorati

–40° C to 85° C

IEEE 802.3-2018 / Har kanal maksimal chiqish quvvati

2.4 dBm

IEEE 802.3-2018 / Har kanal minimal chiqish quvvati

–8.4 dBm

IEEE 802.3-2018 / Uzatgich to‘lqin uzunligi oralig‘i

840 nm through 860 nm

Hujjatdagi tanlash cheklovlari

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred. Other model designations map to the same Part Number in HCT; primary specifications remain from QSFP-100G-SR4-C only. Parallel fiber/core/modal-bandwidth/distance values retain the same source column order; correlate matching columns instead of applying the largest distance to every fiber.

Parallel qiymatlarni o‘qish

Tola, polosa va masofaning | bilan ajratilgan qiymatlari ishlab chiqaruvchi jadvali ustun tartibida bir xil pozitsiyaga mos keladi. Eng uzoq masofa har bir tolaga tegishli emas.

Bir P/N uchun boshqa kodlar — HCT profilini tekshiring

JNP-QSFP-100G-SR4 · QSFP-100G-SR4-T2

Xususiyatlar manbasi: Juniper ↗
Hujjat bo‘yicha tekshirildi: 19.10.2026