Juniper QSFP-100G-SR4-C · 740-061405

MPN / P/N

740-061405

Manufacturer model

QSFP-100G-SR4-C

Part Number

740-061405

Speed

4 x 25 Gigabit Ethernet, 100 Gigabit Ethernet

Breakout Capable

Yes

Form Factor

QSFP28

Product Type

Optical Transceiver

Connector

MPO-12 PC/UPC

Monitoring Available

Yes

Digital Optical Monitoring

Yes

IEEE 802.3-2018 / Cable type

MMF

IEEE 802.3-2018 / Core size/cladding

50/125 µm

IEEE 802.3-2018 / Diagnostic support

Yes

IEEE 802.3-2018 / Distance

70 m | 100 m

IEEE 802.3-2018 / Effective modal bandwidth

2000 MHz x km | 4700 MHz x km

IEEE 802.3-2018 / Fiber grade

OM3 | OM4

IEEE 802.3-2018 / Maximum Power consumption (W)

3.5 W

IEEE 802.3-2018 / Operating Temperature (range)

0° C to 70° C

IEEE 802.3-2018 / Receive lane wavelengths (range)

840 nm through 860 nm

IEEE 802.3-2018 / Receiver input power, each lane (maximum)

2.4 dBm

IEEE 802.3-2018 / Receiver input power, each lane (minimum)

–10.3 dBm

IEEE 802.3-2018 / Signaling rate, each lane

25.78125 GBd +/- 100 ppm

IEEE 802.3-2018 / Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4)

IEEE 802.3ba-2010

IEEE 802.3-2018 / Storage temperature

–40° C to 85° C

IEEE 802.3-2018 / Transmitter output power, each lane (maximum)

2.4 dBm

IEEE 802.3-2018 / Transmitter output power, each lane (minimum)

–8.4 dBm

IEEE 802.3-2018 / Transmitter wavelengths (range)

840 nm through 860 nm

Documented selection limits

Reach, rate, form factor and breakout support apply only to the listed standard/mode, fiber grade and platform/port configuration. Keep source qualifiers for FEC, attenuation, transmit/receive limits, temperature, active/passive operation and cable ends. Check Juniper HCT for the exact host, interface module, port mode, Junos release, required QSA adapter and qualifications before ordering. Do not infer universal interoperability or combine power/temperature/reach across model profiles. Optical link budgets are not calculated or inferred. Other model designations map to the same Part Number in HCT; primary specifications remain from QSFP-100G-SR4-C only. Parallel fiber/core/modal-bandwidth/distance values retain the same source column order; correlate matching columns instead of applying the largest distance to every fiber.

Reading parallel values

Pipe-separated fiber, bandwidth and reach values correspond by position in the original manufacturer column order. The longest reach does not apply to every fiber type.

Other designations for the same P/N — verify HCT profile

JNP-QSFP-100G-SR4 · QSFP-100G-SR4-T2

Specification source: Juniper ↗
Checked against documentation: 19.10.2026