- MPN / P/N
- RB952Ui-5ac2nD-TC
- Ishlab chiqaruvchi belgilanishi
- hAP ac lite TC
- Architecture
- MIPSBE
- CPU
- QCA9531
- CPU core count
- 1
- CPU nominal frequency
- 650 MHz
- Switch chip model
- QCA9531
- Dimensions
- 34 x 119 x 98mm
- RouterOS license
- 4
- Operating System
- RouterOS
- Size of RAM
- 64 MB
- Storage size
- 16 MB
- Storage type
- FLASH
- MTBF
- Approximately 100'000 hours at 25C
- Tested ambient temperature
- -30°C to 70°C
- Wireless 2.4 GHz Max data rate
- 300 Mbit/s
- Wireless 2.4 GHz Number of chains
- 2
- Wireless 2.4 GHz standards
- 802.11b/g/n
- Antenna gain dBi for 2.4 GHz
- 1.5
- Wireless 2.4 GHz chip model
- QCA9531
- Wireless 2.4 GHz generation
- Wi-Fi 4
- Wireless 5 GHz Max data rate
- 433 Mbit/s
- Wireless 5 GHz Number of chains
- 1
- Wireless 5 GHz standards
- 802.11a/n/ac
- Antenna gain dBi for 5 GHz
- 2
- Wireless 5 GHz chip model
- QCA9887
- Wireless 5 GHz generation
- Wi-Fi 5
- WiFi speed
- AC750
- 10/100 Ethernet ports
- 5
- Number of USB ports
- 1
- USB Power Reset
- Yes
- USB slot type
- USB type A
- Max USB current (A)
- 1
- Number of DC inputs
- 2 (DC jack, PoE-IN)
- DC jack input Voltage
- 10-28 V
- Max power consumption
- 20 W
- Max power consumption without attachments
- 8 W
- PoE kirish quvvati
- Passive PoE
- Cooling type
- Passive
- PoE in input Voltage
- 10-28 V
- PoE-out ports
- Ether5
- PoE chiqish quvvati
- Passive PoE
- Low voltage PoE-Out current limit
- 500 mA
- Max total out (A)
- 500 mA
- Certification
- CE, FCC, IC, EAC, ROHS
- IP
- IP20
- Tanlash cheklovlari
- Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.