MikroTik hAP ac lite TC · RB952Ui-5ac2nD-TC

MPN / P/N

RB952Ui-5ac2nD-TC

Manufacturer designation

hAP ac lite TC

Architecture

MIPSBE

CPU

QCA9531

CPU core count

1

CPU nominal frequency

650 MHz

Switch chip model

QCA9531

Dimensions

34 x 119 x 98mm

RouterOS license

4

Operating System

RouterOS

Size of RAM

64 MB

Storage size

16 MB

Storage type

FLASH

MTBF

Approximately 100'000 hours at 25C

Tested ambient temperature

-30°C to 70°C

Wireless 2.4 GHz Max data rate

300 Mbit/s

Wireless 2.4 GHz Number of chains

2

Wireless 2.4 GHz standards

802.11b/g/n

Antenna gain dBi for 2.4 GHz

1.5

Wireless 2.4 GHz chip model

QCA9531

Wireless 2.4 GHz generation

Wi-Fi 4

Wireless 5 GHz Max data rate

433 Mbit/s

Wireless 5 GHz Number of chains

1

Wireless 5 GHz standards

802.11a/n/ac

Antenna gain dBi for 5 GHz

2

Wireless 5 GHz chip model

QCA9887

Wireless 5 GHz generation

Wi-Fi 5

WiFi speed

AC750

10/100 Ethernet ports

5

Number of USB ports

1

USB Power Reset

Yes

USB slot type

USB type A

Max USB current (A)

1

Number of DC inputs

2 (DC jack, PoE-IN)

DC jack input Voltage

10-28 V

Max power consumption

20 W

Max power consumption without attachments

8 W

PoE input power

Passive PoE

Cooling type

Passive

PoE in input Voltage

10-28 V

PoE-out ports

Ether5

PoE output power

Passive PoE

Low voltage PoE-Out current limit

500 mA

Max total out (A)

500 mA

Certification

CE, FCC, IC, EAC, ROHS

IP

IP20

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Specification source: MikroTik ↗
Checked against documentation: 16.10.2026