MikroTik cAP ax · cAPGi-5HaxD2HaxD

MPN / P/N

cAPGi-5HaxD2HaxD

Manufacturer designation

cAP ax

Architecture

ARM 64bit

CPU

IPQ-6010

CPU core count

4

CPU nominal frequency

auto (864 - 1800) MHz

CPU Threads count

4

Switch chip model

IPQ-6010

RouterOS license

4

Operating System

RouterOS v7

Size of RAM

1 GB

Storage size

128 MB

Storage type

NAND

MTBF

Approximately 200'000 hours at 25C

Tested ambient temperature

-40°C to 70°C

Wireless 2.4 GHz Max data rate

574 Mbit/s

Wireless 2.4 GHz Number of chains

2

Wireless 2.4 GHz standards

802.11b/g/n/ax

Antenna gain dBi for 2.4 GHz

6

Wireless 2.4 GHz chip model

QCN-5022

Wireless 2.4 GHz generation

Wi-Fi 6

Wireless 5 GHz Max data rate

1200 Mbit/s

Wireless 5 GHz Number of chains

2

Wireless 5 GHz standards

802.11a/n/ac/ax

Antenna gain dBi for 5 GHz

5.5

Wireless 5 GHz chip model

QCN-5052

Wireless 5 GHz generation

Wi-Fi 6

WiFi speed

AX1800

10/100/1000 Ethernet ports

2

Number of 1G Ethernet ports with PoE-out

1

Number of DC inputs

2 (DC jack, PoE-IN)

DC jack input Voltage

18-57 V

Max power consumption

36 W

Max power consumption without attachments

11 W

PoE input power

802.3af/at

Cooling type

Passive

PoE in input Voltage

18-57 V

PoE-out ports

Ether2

PoE output power

Passive PoE up to 57V

Low voltage PoE-Out current limit

600 mA

High voltage PoE-Out current limit

400 mA

Max total out (A)

600 mA

Total output current

0.4

Total output power

19.2

Certification

CE, FCC, IC, EAC, ROHS

IP

20

CPU temperature monitor

Yes

Mode button

Yes

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Specification source: MikroTik ↗
Checked against documentation: 16.10.2026