MikroTik RB4011iGS+5HacQ2HnD-IN

MPN / P/N

RB4011iGS+5HacQ2HnD-IN

Manufacturer designation

RB4011iGS+5HacQ2HnD-IN

Architecture

ARM 32bit

CPU

AL21400

CPU core count

4

CPU nominal frequency

auto (533 - 1900) MHz

CPU Threads count

4

Switch chip model

RTL8367SB

Dimensions

228 x 120 x 30 mm

RouterOS license

5

Operating System

RouterOS v7

Size of RAM

1 GB

Storage size

512 MB

Storage type

NAND

MTBF

Approximately 200'000 hours at 25C

Tested ambient temperature

-40°C to 45°C

Wireless 5 GHz Max data rate

1733 Mbit/s

Wireless 5 GHz Number of chains

4

Wireless 5 GHz standards

802.11a/n/ac

Antenna gain dBi for 5 GHz

3

Wireless 5 GHz chip model

QCA9984

Wireless 5 GHz generation

Wi-Fi 5

Wireless 2.4 GHz Max data rate

300 Mbit/s

Wireless 2.4 GHz Number of chains

2

Wireless 2.4 GHz standards

802.11b/g/n

Antenna gain dBi for 2.4 GHz

3

Wireless 2.4 GHz chip model

R11e-2HnD

Wireless 2.4 GHz generation

Wi-Fi 4

WiFi speed

AC2000

10/100/1000 Ethernet ports

10

SFP+ ports

1

MiniPCI-e slots

1

Serial console port

RJ45

Number of DC inputs

2 (DC jack, PoE-IN)

DC jack input Voltage

12-57 V

Max power consumption

44 W

Max power consumption without attachments

23 W

PoE input power

Passive PoE

Cooling type

Passive

PoE in input Voltage

18-57 V

PoE-out ports

Ether10

PoE output power

Passive PoE up to 57V

Low voltage PoE-Out current limit

600 mA

High voltage PoE-Out current limit

420 mA

Max total out (A)

600 mA

Certification

CE, FCC, IC, EAC, ROHS

IP

IP20

PCB temperature monitor

Yes

Voltage Monitor

Yes

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Specification source: MikroTik ↗
Checked against documentation: 16.10.2026