MikroTik hAP ac · RB962UiGS-5HacT2HnT

MPN / P/N

RB962UiGS-5HacT2HnT

Manufacturer designation

hAP ac

Architecture

MIPSBE

CPU

QCA9558

CPU core count

1

CPU nominal frequency

720 MHz

Switch chip model

QCA8337

Dimensions

114 x 137 x 29mm

RouterOS license

4

Operating System

RouterOS v7

Size of RAM

128 MB

Storage size

16 MB

Storage type

FLASH

MTBF

Approximately 200'000 hours at 25C

Tested ambient temperature

-40°C to 70°C

Wireless 2.4 GHz Max data rate

450 Mbit/s

Wireless 2.4 GHz Number of chains

3

Wireless 2.4 GHz standards

802.11b/g/n

Antenna gain dBi for 2.4 GHz

2.5

Wireless 2.4 GHz chip model

QCA9558

Wireless 2.4 GHz generation

Wi-Fi 4

Wireless 5 GHz Max data rate

1300 Mbit/s

Wireless 5 GHz Number of chains

3

Wireless 5 GHz standards

802.11a/n/ac

Antenna gain dBi for 5 GHz

2

Wireless 5 GHz chip model

QCA9880

Wireless 5 GHz generation

Wi-Fi 5

WiFi speed

AC1750

10/100/1000 Ethernet ports

5

SFP ports

1

Number of USB ports

1

USB Power Reset

Yes

USB slot type

USB type A

Max USB current (A)

1

Number of DC inputs

2 (DC jack, PoE-IN)

DC jack input Voltage

11-57 V

Max power consumption

17 W

PoE input power

Passive PoE

Cooling type

Passive

PoE in input Voltage

11-57 V

PoE-out ports

Ether5

PoE output power

Passive PoE

Low voltage PoE-Out current limit

700 mA

High voltage PoE-Out current limit

350 mA

Max total out (A)

700 mA

Certification

CE, FCC, IC, EAC, ROHS

IP

IP20

PCB temperature monitor

Yes

Voltage Monitor

Yes

Beeper

Yes

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Specification source: MikroTik ↗
Checked against documentation: 16.10.2026