MikroTik cAP XL ac · RBcAPGi-5acD2nD-XL

MPN / P/N

RBcAPGi-5acD2nD-XL

Manufacturer designation

cAP XL ac

Architecture

ARM 32bit

CPU

IPQ-4018

CPU core count

4

CPU nominal frequency

488-896 (auto) MHz

CPU Threads count

4

Switch chip model

IPQ-4018

Dimensions

191 x 42 mm

RouterOS license

4

Operating System

RouterOS

Size of RAM

128 MB

Storage size

16 MB

Storage type

FLASH

MTBF

Approximately 100'000 hours at 25C

Tested ambient temperature

-40°C to 70°C

Wireless 2.4 GHz Max data rate

300 Mbit/s

Wireless 2.4 GHz Number of chains

2

Wireless 2.4 GHz standards

802.11b/g/n

Antenna gain dBi for 2.4 GHz

6

Wireless 2.4 GHz chip model

IPQ-4018

Wireless 2.4 GHz generation

Wi-Fi 4

Wireless 5 GHz Max data rate

867 Mbit/s

Wireless 5 GHz Number of chains

2

Wireless 5 GHz standards

802.11a/n/ac

Antenna gain dBi for 5 GHz

5.5

Wireless 5 GHz chip model

IPQ-4018

Wireless 5 GHz generation

Wi-Fi 5

WiFi speed

AC1200

10/100/1000 Ethernet ports

2

Number of 1G Ethernet ports with PoE-out

1

Number of DC inputs

1 (PoE-IN)

Max power consumption

24 W

Max power consumption without attachments

11 W

PoE input power

802.3af/at

Cooling type

Passive

PoE in input Voltage

18-57 V

PoE-out ports

Ether2

PoE output power

Passive PoE up to 57V

Low voltage PoE-Out current limit

500 mA

High voltage PoE-Out current limit

330 mA

Max total out (A)

500 mA

Certification

CE, FCC, IC, EAC, ROHS

Mode button

Yes

Selection limits

Confirm exact hardware revision, regional model, adapter plug, firmware/controller support and required accessories before ordering. Published wireless PHY rates and maximum wired/VPN performance are conditional laboratory/standard limits, not guaranteed application throughput. Radio bands/channels, transmit limits, 6 GHz/AFC and cellular operator compatibility depend on country and local regulation. Antennas, SIM/eSIM plans, controller licensing and adapters are not universally included. PoE input powers this device; PoE output powers downstream equipment. Passive PoE is not automatically IEEE 802.3af/at/bt compatible; match voltage, polarity, pairs and available power budget.

Specification source: MikroTik ↗
Checked against documentation: 16.10.2026