StarTech.com 25SATSAS35 · Drive bracket

MPN / P/N

25SATSAS35

Manufacturer designation

2.5in SATA/SAS SSD/HDD to 3.5in SATA Hard Drive Converter

Special Notes

Although mobile racks can enable a Serial Attached SCSI (SAS); drive to connect using a standard Serial ATA (SATA) connector,; the hard drive controller must be SAS compatible to properly; support SAS drives. SAS controllers can work with SAS and; SATA drives, but most SAS drives will only work with a SAS; controller.

Colour

Black

Material

Plastic

Max Drive Height

0.6 in [15 mm]

Product Length

5.7 in [14.5 cm]

Product Width

3.9 in [100 mm]

Product Height

1.0 in [25 mm]

Weight of Product

4.8 oz [136 g]

RAID

No

Fans Included? Yes/No

No

Front Door Key Lock

No

Number of Drives

1

Drive Size

2.5in

Compatible Drive Types

SAS & SATA

Drive Installation

Removable

Host Connector 1 (Quantity)

1

Host Connector 1

SATA (7-Pin + 15-Pin)

Connector 1 (Quantity)

1

Connector 1 — source designation

SFF-8482 (29-Pin, SAS)

Documented selection limits

Match the exact connector at each end, cable length, interface generation and host/device requirements. Published data rates, power ratings and display modes are maximum conditional limits, not guaranteed application results. A physically matching connector alone does not establish protocol, charging, video or device compatibility. Match drive form factor, thickness, host interface/protocol and power needs; an adapter or bracket does not include a storage drive unless the exact SKU explicitly states it.

Specification source: StarTech.com ↗
Checked against documentation: 16.10.2026