StarTech.com 25SATSAS35HD · Drive bracket

MPN / P/N

25SATSAS35HD

Manufacturer designation

2.5" to 3.5" Hard Drive Adapter - For SATA and SAS SSDs/HDDs

Special Notes

Although mobile racks can enable a Serial Attached SCSI (SAS); drive to connect using a standard Serial ATA (SATA) connector,; the drive controller must be SAS compatible to properly support; SAS drives. SAS controllers can work with SAS and SATA; drives, but most SAS drives will only work with a SAS controller.

Input voltage

5V DC / 12V DC

Output Voltage

5 DC

Colour

Silver & Black

Material

Aluminum and Plastic

Product Length

5.7 in [14.6 cm]

Product Width

4.0 in [10.1 cm]

Product Height

1.0 in [26.0 mm]

Weight of Product

7.9 oz [224.0 g]

Operating Temperature

0C to 55C (32F to 131F)

Storage Temperature

-20C to 55C (-4F to 131F)

Humidity

5% ~ 65%

TRIM Support

Yes

S.M.A.R.T. Support

Yes

4Kn Support

Yes

SATA Type and Rate

SATA/SAS 6 Gbps

RAID

No

Hot Swap Capability

Yes

Fans Included? Yes/No

No

Front Door Key Lock

No

Interface

SATA; SAS

Number of Drives

1

Drive Size

2.5in & 3.5in

Compatible Drive Types

SAS & SATA

Drive Installation

Removable

Supported Drive Height(s)

7mm; 9.5mm; 12.5mm; 15mm

Host Connector 1 (Quantity)

1

Host Connector 1

SATA (7-Pin + 15-Pin)

Connector 1 (Quantity)

1

Connector 1 — source designation

SFF-8482 (29-Pin, SAS)

Documented selection limits

Match the exact connector at each end, cable length, interface generation and host/device requirements. Published data rates, power ratings and display modes are maximum conditional limits, not guaranteed application results. A physically matching connector alone does not establish protocol, charging, video or device compatibility. Match drive form factor, thickness, host interface/protocol and power needs; an adapter or bracket does not include a storage drive unless the exact SKU explicitly states it.

Specification source: StarTech.com ↗
Checked against documentation: 16.10.2026