- Model code
- AOC-AH25G6-N2S2TM
- Identifier scope
- Official model designation, not a verified ordering part number. Region, revision and bundle require separate confirmation.
- Manufacturer model
- AOC-AH25G6-N2S2TM
- General / item 1
- NVIDIA ConnectX-6 Lx 25GbE controller with dual SFP28 ports
- General / item 2
- Backward compatibility: 10GbE support
- General / item 3
- Intel E610-XAT2 10GbE Controller with dual RJ45 ports
- General / item 4
- Multi-speed support: 5/2.5/1GbE, 10GBASE-T, 100BASE-TX
- Storage Acceleration (CX6-LX Controller) / item 1
- NVMe over Fabric offloads for target
- Storage Acceleration (CX6-LX Controller) / item 2
- Storage protocols: iSER, RDMA
- RDMA over Converged Ethernet (CX6-LX Controller) / item 1
- RoCE v1/v2
- RDMA over Converged Ethernet (CX6-LX Controller) / item 2
- Zero-Touch RoCE (no ECN, no PFC)
- RDMA over Converged Ethernet (CX6-LX Controller) / item 3
- RoCE over overlay networks
- RDMA over Converged Ethernet (CX6-LX Controller) / item 4
- IPsec over RoCE
- RDMA over Converged Ethernet (CX6-LX Controller) / item 5
- Selective repeat
- RDMA over Converged Ethernet (CX6-LX Controller) / item 6
- GPUDirect®
- RDMA over Converged Ethernet (CX6-LX Controller) / item 7
- Dynamically Connected Transport (DCT)
- RDMA over Converged Ethernet (CX6-LX Controller) / item 8
- Burst buffer offload
- Management and Control / item 1
- SMBus 2.0
- Management and Control / item 2
- NC-SI (disabled by default in standby mode)
- Management and Control / item 3
- NC-SI, MCTP over SMBus and PCIe - Baseboard Management Controller interface
- Management and Control / item 4
- PLDM for Monitor and Control DSP0248
- Management and Control / item 5
- PLDM for Firmware Update DSP026
- Remote Boot / item 1
- Remote boot over Ethernet
- Remote Boot / item 2
- Remote boot over iSCSI
- Remote Boot / item 3
- UEFI support for x86 and ARM servers environments
- Remote Boot / item 4
- PXE boot
- Standards Compliance / item 1
- IEEE 802.3ae (10 Gigabit Ethernet)
- Standards Compliance / item 2
- IEEE 802.3by (25G with all FEC modes)
- Standards Compliance / item 3
- IEEE 802.3ad, 802.1AX (Link Aggregation)
- Standards Compliance / item 4
- IEEE 802.3az (Energy Efficient Ethernet, Fast-Wake mode)
- Standards Compliance / item 5
- IEEE 802.3ap (Auto-negotiation and KR startup)
- Standards Compliance / item 6
- IEEE 802.1Q, 802.1P (VLAN tags and priority)
- Standards Compliance / item 7
- IEEE 802.1Qaz (ETS)
- Standards Compliance / item 8
- IEEE 802.1Qbb (PFC)
- Standards Compliance / item 9
- IEEE 802.1Qbg
- Standards Compliance / item 10
- IEEE 1588v2
- Standards Compliance / item 11
- IEEE 1149.1 and IEEE 1149.6 (JTAG)
- Standards Compliance / item 12
- PCI Express Gen 3.0 and 4.0
- Power Consumption / item 1
- Maximum Power: 17W
- Operating Conditions / item 1
- Storage Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Conditions / item 2
- Storage Humidity: 90% non-condensing relative humidity at 35°C
- Physical Dimensions / item 1
- Card PCB Dimensions: 76mm x 115mm (W x D)
- Documented selection limits
- Link speed/ports are supported capabilities, not guaranteed application throughput. Supermicro AIOM, SIOM, microLP and proprietary variants are not interchangeable with ordinary PCIe cards. Check exact chassis/slot form factor, lanes, bracket, airflow, power, firmware, OS and approved optics. No transceiver, cable or host compatibility inferred.